VIP member
Rubber testing mixer
The internal mixer is mainly used for the plasticization and mixing of rubber, as well as for the mixing of plastics, asphalt materials, asphalt felt
Product details
Brand: Jiubin
model: JB-10
Name: Rubber testing mixer
1、 Product Overview：
The internal mixer is mainly used for the plasticization and mixing of rubber, as well as for the mixing of plastics, asphalt materials, asphalt felt materials, and synthetic resin materials. It is one of the main rubber mixing equipment in rubber factories. Since the 1970s, although foreign countries have developed rapidly in rubber refining technology and equipment, such as using screw extruders instead of internal mixers and open mixers for plastic and mixing, they still cannot replace internal mixers. The rubber mixing equipment in new modern factories still mainly uses internal mixers, and the mixing method still adopts two-stage mixing method.
2、 Technical parameters：
1. Total capacity of internal mixer: 1L
2. Power output speed: （10~120r/min）
3. Front and rear rotor speed ratio: 1:1.24
4. Speed control accuracy: ± 1% F S
5. Pressure of material block on material: 0.1-0.25MPa
6. Cooling of mixing chamber and front and rear rotors: manual, automatic
7. Temperature control: 2 channels
8. Temperature control accuracy: ± 1 ℃
9. Temperature control range: room temperature~250 ℃
10. Material temperature extreme value alarm: The software sets the material temperature extreme value ≥ alarm
11. Torque measurement range: 0~1200N. m
12. Torque measurement accuracy: 0.5~1% F S
13. Extreme torque protection: software set value protection
14. Motor and reducer power: 11Kw
15. Net weight of machine: 1380Kg
16. Dimensions: 1700 × 900 × 2000mm
model: JB-10
Name: Rubber testing mixer
1、 Product Overview：
The internal mixer is mainly used for the plasticization and mixing of rubber, as well as for the mixing of plastics, asphalt materials, asphalt felt materials, and synthetic resin materials. It is one of the main rubber mixing equipment in rubber factories. Since the 1970s, although foreign countries have developed rapidly in rubber refining technology and equipment, such as using screw extruders instead of internal mixers and open mixers for plastic and mixing, they still cannot replace internal mixers. The rubber mixing equipment in new modern factories still mainly uses internal mixers, and the mixing method still adopts two-stage mixing method.
2、 Technical parameters：
1. Total capacity of internal mixer: 1L
2. Power output speed: （10~120r/min）
3. Front and rear rotor speed ratio: 1:1.24
4. Speed control accuracy: ± 1% F S
5. Pressure of material block on material: 0.1-0.25MPa
6. Cooling of mixing chamber and front and rear rotors: manual, automatic
7. Temperature control: 2 channels
8. Temperature control accuracy: ± 1 ℃
9. Temperature control range: room temperature~250 ℃
10. Material temperature extreme value alarm: The software sets the material temperature extreme value ≥ alarm
11. Torque measurement range: 0~1200N. m
12. Torque measurement accuracy: 0.5~1% F S
13. Extreme torque protection: software set value protection
14. Motor and reducer power: 11Kw
15. Net weight of machine: 1380Kg
16. Dimensions: 1700 × 900 × 2000mm
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-