S1 series two-piece plug gauge:

S1 series two-piece plug gauge product introduction:

The DIATEST two-piece measuring system is used to measure hole diameter. Adopting modular design, most types of holes can be measured using additional accessories. This measuring instrument can be used for grouping control of products and is suitable for laboratories.
Due to the various types of measuring instruments, they can measure various holes, such as blind holes, groove widths, etc

S1 series two-piece plug gauge product parameters:

Pre sale understanding of S00 series two-piece plug gauge:

What is the measurement range of a two-piece plug gauge?
The measurement range of the two-piece plug gauge is suitable for 0.47mm-41.1mm. The measurement range of each probe does not vary depending on the size, and the larger the size, the larger the range. We can also provide slightly larger non-standard two-piece probes according to customer needs.
How to choose the form of the two-piece plug gauge probe?
Two petal measuring heads are generally divided into standard hole measuring heads (carbon steel and hard alloy measuring points), ceramic measuring heads, and blind hole measuring heads. You can determine the form of the measuring head based on the depth of the hole to be measured. If you want to measure the position very close to the root, you can choose a blind hole measuring head; According to the form of the hole, we can also make non-standard super blind hole probes; If the workpiece to be measured is relatively soft, such as aluminum, copper or other materials, ceramic probes can be selected.
Do you need any other accessories for the two-piece plug gauge?
The standard components of a two-piece plug gauge are a handle, a display meter, a two-piece probe, a measuring needle, and a calibration ring gauge. According to the customer's measurement needs and different environments, we can provide standard accessory extension rods to increase the measurement depth, or provide depth limits for convenient measurement. At the same time, we also have electronic handles that can be connected to sensors, and can be connected to the platform for desktop measurement. The flexibility of the two-piece plug gauge is excellent, which can meet different measurement needs.
What is the supply cycle of the two-piece plug gauge?
We usually have a set of standard probes for hard alloy materials in stock. If there is no inventory, the lead time for ordering from Germany is about 3 weeks and it can be delivered to you.
5. Do two-piece plug gauges have to be purchased as a set?
The two-piece plug gauge can be purchased separately as an accessory, not necessarily as a complete set.