The on-site installed temperature transmitter unit in thermocouple and thermistor temperature transmitter instruments is used in conjunction with industrial thermocouples and thermistors. It adopts a two-wire transmission method (two wires serve as a common transmission line for power input and signal output). Convert industrial thermocouple and thermistor signals into 4-20mA and 0-10mA output signals that are linear with the input signal or temperature signal.
This temperature transmitter can be directly installed in the junction box of thermocouples and thermal resistors to form an integrated structure. As a new generation of temperature measuring instrument, it can be widely used in industrial sectors such as metallurgy, petroleum, chemical, power, light industry, textile, food, national defense, and scientific research.










Adopting silicone rubber or epoxy resin sealing structure, it is shock resistant, moisture resistant, and suitable for installation and use in harsh on-site environments.
Installed on-site in junction boxes for thermocouples and thermal resistors, it directly outputs 4-20mA and 0-10mA output signals. This not only saves expensive compensation wire costs, but also improves the anti-interference ability during long-distance signal transmission;
Thermocouple transmitters have automatic compensation function for cold junction temperature;
High precision, low power consumption, wide temperature range for use, stable and reliable operation;
Widely applicable, it can form an integrated on-site installation structure with thermocouples and thermistors, and can also be installed as a functional module in detection equipment and instrument panels for use;
The intelligent temperature transmitter can communicate with the upper computer through a HART modem or remotely manage, configure, monitor variables, calibrate, and maintain the model, scale, and range of the transmitter through handheld devices and PCs;
The intelligent temperature transmitter can adjust the display direction of the transmitter according to the actual needs of the user, and display the medium temperature measured by the transmitter, changes in sensor values, output current, and percentage













Measuring range

Category	Material	Dividing number	Measurement range
Hot Electricity Oh my	Nickel chromium constantan	E	Choose within the range of 0-1000 ℃
	Nickel chromium nickel silicon	K	Choose within the range of 0-1300 ℃
	Platinum rhodium 10 platinum	S	Choose within the range of 0-1600 ℃
	Platinum rhodium 30- Platinum rhodium 6	B	Choose within the range of 0-1800 ℃
	Copper - Copper Kang	T	Choose within the range of 0-400 ℃
	Iron Copper	J	Choose within the range of 0-1200 ℃
Hot Electricity Resistance	Copper thermistor	Cu50	-Choose within the range of 50-+150 ℃
	Copper thermistor	Cu100	-Choose any temperature within the range of 50-+15 ℃
	Platinum thermistor	Pt100	-Choose within the range of 200-+600 ℃

Model code and description: (For selection with transmission sensor, please refer to the selection with temperature transmitter (explosion-proof) thermocouple/resistor)

Model Description
SBW	temperature transmitter
Category	R	thermocouple
	Z	thermal resistance
Sensors		1	Compatible with K-type thermocouple/thermistor compatible with Pt100
		2	Compatible with E-type thermocouple/thermistor and Cu100
		3	Adapt to J-type thermocouple/thermistor and Cu50
		4	Compatible with B-type thermocouple
		5	Compatible with S-type thermocouple
		6	Compatible with T-type thermocouple
		7	Compatible with N-type thermocouples
		8	User
Circuit category			0	Isolated type
			1	Non isolated type
Installation method				0	Conventional type
				1	specialized
				2	Wall mounted type
				3	Rail type
Temperature transmitter					0	Conventional type
					1	Intelligent
					2	Digital display type
					3	pointer type
					4	Intelligent digital display type
					5	Intelligent pointer type
					6	Equipped with HART protocol type

1. Our company promises that if you purchase our products, during the one-year warranty period, if you receive notification from the user about such defects, our company will unconditionally provide free repair or replacement for products that are indeed defective
2. We promise to handle the customer's technical questions within one working day.
3. We promise to provide test results within 3 working days and complete the repair within 7 working days for the instruments that need to be returned to the factory for repair.
4. Within 2 weeks after returning the instrument to the customer, conduct a follow-up visit to the user and provide free consultation on automation related technologies.