VIP member
SG type three legged manual scraper discharge centrifuge
Working principle of SG series three legged manual scraper centrifuge: The SG series three legged centrifuge is a fully automatic filtering centrifuge
Product details
| Working principle of SG type three legged manual scraper centrifuge: The SG series three legged centrifuge is a fully automatic filtering centrifuge with vertical bottom discharge, continuous operation, intermittent discharge, and program control. The SG is a semi-automatic centrifuge. When the motor drives the drum to rotate and reaches the feeding speed state, the material to be separated enters the high-speed rotating drum through the feeding pipe. After the feeding reaches the predetermined volume, the feeding stops and rises to high-speed separation. Under the action of centrifugal force, the material is filtered through the filter cloth (filter screen). The liquid phase passes through the filter layer and is thrown into the cavity through the drum hole and discharged through the outlet pipe. The solid phase is trapped in the drum to form a cylindrical filter cake. Then, the filter cake can be washed. After reaching the separation requirements, the speed is reduced to the discharge speed state, and the scraper device is activated to scrape the filter cake off the inner wall of the drum and discharge it through the lower outlet of the centrifuge. |
The shell and chassis of the SG manual scraper unloading centrifuge adopt a separate structure, supported by three legs. The upper cover is a flat plate structure, fastened to the shell with screws. The machine cover is equipped with feeding tubes, washing tubes, manholes, etc. The unloading is a hydraulic driven combination scraper.
Main materials: The triangle ring, column base, chassis, shaft seat, and drum bottom are all made of HT material. The drum wall, baffle plate, outer shell, chassis, bearing lining, shell cover lining, and rotary flange bottom lining are all made of stainless steel, and their surfaces are polished.
Standard configuration of SG type three legged manual scraper centrifuge: PLC+frequency conversion control, energy consumption braking, material level detection, vertical motor, ordinary transmission triangle belt and safety cover, on-site operation box.
Structural selection: tubular structure (chassis and shell integrated)
The drum adopts stainless steel cutting type
Large flip cover structure, equipped with pneumatic, hydraulic or spring assisted opening device
Setting up exhaust ports and other requirements
Material selection for SG type three legged manual scraper centrifuge:
Due to anti-corrosion requirements, corresponding other materials are used: SUS316，316L， 321304, titanium material, plastic lining, rubber lining, spray coating F46, etc;
Parameter selection of SG type three legged manual scraper centrifuge:
We can provide products with different parameters according to the customer's process needs
1. Loading capacity (loading limit)
2. Drum speed (maximum separation factor)
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-