VIP member
Product details
SHB-L ion rod
Product Introduction:
The static eliminator is divided into two parts: the static host and the static rod. The electrostatic host, also known as the high-voltage generator, is mainly used to generate high voltage and deliver it to the electrostatic rod. The length of the electrostatic rod is customized by the customer. An electrostatic rod induces high voltage onto a discharge needle, forming a strong electric field that ionizes the air and generates a large amount of negative energy
Neutralize the static electricity on the surface of protected workpieces and objects with ions.
Scope of application:
The static eliminator produced by our factory is suitable for printing, paper, rubber products, cigarettes, leather manufacturing,
Food packaging, fabric shaping, plastic product slitting, pharmaceutical packaging machinery and other industries.
Application example:
1. Printing factory: To prevent uneven adhesion of printed paper, unclear printing of text and patterns, and static electricity generated by exposed printing paper, which may cause oil fires.
2. Rubber and plastic rubber factories: To prevent electricity or absorption of rubber powder, dust, or uneven placement of plastic bags after sealing during work.
3. Paper making factory: prevent adhesion and dust adhesion.
4. Dyeing and finishing factory: prevent electricity generation and fabric folding from being affected during work.
5. Textile and spinning factories: prevent fabric rolls from sticking and standing hair.
6. Film factory: prevent photosensitive and dust adhesion.
7. Industrial drug bags: prevent drugs from being attached to the bags.
8. Static eliminators are suitable for various types of bag making machines to eliminate static electricity on the surface of products, making the produced plastic bags neat and beautiful.
Power on test:
Before powering on, check the installation and use a multimeter to check that the electrostatic host, electrostatic rod, and mechanical equipment are connected to the grounding wire. Is the bracket
Tighten, is there a high voltage connectionTighten it,Is the power cord plugged in properly, is the static rod parallel to the object being eliminated, and is the discharge needle between the metal aluminum bars
Is there any debris that is prone to short circuiting.
inspectIt can only be powered on. After powering on, use a screwdriver (note: the handle of the screwdriver must be well insulated, pay attention to safety) to handle the metal partsLean on it
Metal aluminum strip
Slowly move upwards towards the discharge needle tip. When the screwdriver is 5mm-10mm away from the needle tip, there will be a discharge spark, or when the distance between the discharge area and the back of the hand is 2cm-5cm, you will feel the electric ion windIndicating normal.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-