Changzhou Ronghao Machinery Manufacturing Co., Ltd
Home>Products>SMH series tunnel type hot air circulation oven
SMH series tunnel type hot air circulation oven
SMH series tunnel type hot air circulation oven
Product details

00.jpg

p064663001309918737.jpg

product details

summary:

The SD series tunnel type hot air circulation oven has the characteristics of large loading capacity and simple operation. Mainly suitable for drying dehydrated vegetables, fruits and other agricultural and sideline products, as well as drying and calcining wooden materials, ceramic products and various granular materials that require a long drying time.

characteristic:

Users can choose between vertical or horizontal circulation drying methods based on material characteristics to improve efficiency and product quality. Centralized heating can be used, which is more conducive to connecting heat sources such as coal-fired, oil fired, gas-fired hot air stoves, and thermal oil stoves, making it convenient for users to produce and use. According to user needs, manual or mechanical feeding and discharging can be used.

technological process:

After the materials are loaded into the tray, the tray and cart enter the entrance of the tunnel oven, and are carried into the tunnel by the transmission mechanism. The speed of the oven cart can be adjusted; Cold air enters the centrifugal fan through the fresh air supplement port, is heated by a finned heat exchanger, and is sent into the tunnel box to fully contact with the wet material for heat exchange. The moisture in the material is evaporated into water vapor, which enters the air duct on the side of the box together with the hot air. Part of the wet air is discharged through the dehumidification port, and the other part is sucked in by the centrifugal fan and recycled; Due to the varying moisture content of the materials in each unit, the ratio of moisture discharge to circulating air volume also differs for each unit; During the entire drying process, the temperature of the hot air is also different; The moisture content of the material in the early stage of drying is relatively high, and a higher hot air temperature can be used; The moisture content of the material in the later stage of drying is relatively low, and a lower hot air temperature can be used.

Technical parameters:

Loading amount per time (kg) Equipped power (kw) Number of drying cars (vehicles) Number of baking trays (pcs) Heat dissipation area (m2)
SD-11 1000 20.2 22 528 200
SD-16 1500 26.2 30 720 300
SD-22 2000 32.2 40 960 400
SD-30 2500 38.2 50 1200 500
SD-36 3000 38.2 60 1440 600
Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!