SWP-CA102 Thermal Signal Calibration Instrument (discontinued)-Fornitore globale

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone
Address

17th Floor, Dongchang Building, 8 Cotton Tree Drive, Central, Hong Kong

Contact Now

SWP-CA102 Thermal Signal Calibration Instrument (discontinued)

Product details

Specification parameters	Function	Range	Accuracy
DC signal input	DCV	0~35V	±0.10%FS
	DCmV	0~100mV	±0.05%FS
	DCmA	0~35mA	±0.05%FS
	RTD	CU50、PT100	±0.10%FS
		K、T、E、J、N、W3-25
	TC	R、S、B	±0.20%FS
	F	0~5000.0Hz	±0.20Hz
DC signal output	DCV	0~5V	±0.05%FS
	DCmV	0~100mV	±0.05%FS
	DCmA	0~24mA	±0.05%FS
	R^{Note ①}	10.0~500.0Ω	±0.15% FS
		500.0~2500Ω
		2500~5000.0Ω
	TC	K、T、E、J、N、W3-25	±0.10%FS
		R、S、B	±0.20%FS
	F	0~1000Hz	±1Hz
		0~5.00KHz	±0.02KHz
operation temperature	-10~55℃
storage temperature	-20~70℃
Relative temperature (Relative working temperature without condensation)	90%（10~30℃）
	75%（30~40℃）
	45%（40~50℃）
	35%（50~55℃）
	When<10 ℃, do not control
electromagnetic compatibility	EN55022，EN55024
vibrate	Randomness, 2x acceleration, 5 to 500Hz
impact	30G, 11 milliseconds, half sine wave impulse
Power requirements	Built in Ni MH rechargeable battery or DC9V power supply
External dimensions (Length x Width x Height)	215 mm×109 mm×44.5mm
weight	About 500 grams
Note ① Analog resistor output requires an excitation current of 0.6mA

Online inquiry