SWP-S61ERD/ERG series remote transmission pressure/differential pressure transmitter-Fornitore globale

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone
Address

17th Floor, Dongchang Building, 8 Cotton Tree Drive, Central, Hong Kong

Contact Now

SWP-S61ERD/ERG series remote transmission pressure/differential pressure transmitter

Product details

1、 General Technical Parameters

Specification parameters	speak bright
power supply	12-45VDC.
output signal	Two line 4-20mA DC with digital communication (HART protocol) output.
Built in monitor (optional)	LCD displays numerical values, digits, units, and bar charts.
self-diagnosis	Amplifier failure, capsule failure, setting failure, environmental temperature alarm, pressure/static pressure alarm, etc.
operation temperature	-40-85 º C.

2、 Sensor type

Sensor model	measuring range	Measurement range	Maximum working pressure	Accuracy/Stability
4	-37.4～37.4kPa	6.2～37.4 kPa	Rated pressure and distance of base gauge Rated pressure of transmission sealing device The smaller value	Range ±0.2%/ The maximum deviation per year is Range ±0.2%
5	-100～186.8 kPa	31.1～186.8 kPa
6	-100～690 kPa	117～690 kPa
7	-100～2068 kPa	345～2068 kPa

model	Type of transmitter
SWP-ST61ERD	Remote pressure transmitter
SWP-ST61ERG	Remote differential pressure transmitter
code	Measurement Range (URL)
4	6.2 ～37.4kPa
5	31.1 ～186.8kPa
6	117 ～690kPa
7	345 ～2068kPa
T	special project
code	Output
N	4-20mA,
S	4-20mA with digital communication (HART protocol)
code	Structural materials
	Flanges/joint	Drain/exhaust valve		Isolation Diaphragm
22	316 stainless steel	316 stainless steel		316l stainless steel
code	Process filling		Temperature Limit
A	D. C. Silicone oil 200		-40℃～149℃
B	D. C. Silicone oil 704		15℃～315℃
C	Inert liquid		-45℃～205℃
code	Remote transmission device
S1	A remote transmission device
S2	Two remote transmission devices
code	Display header（Choose not to fill in)
M3	liquid crystal display
code	mounting bracket
B1	Pipe bending bracket (outer diameter of pipe Φ 50-60)
B2	Board mounted bending bracket
B3	Pipe installation flat bracket (pipe outer diameter Φ 50-60)
code	Flange adapter
N	No flange adapter (with 1/4NPT female thread on the flange for pressure connection)
C1	1/2NPT female threaded flange adapter, pressure transition joint welded pressure pipe (stainless steel)
C2	M20x1.5 male threaded flange adapter, pressure transition joint welded pressure pipe (stainless steel)
code	Explosion proof type
d	Explosion proof type, explosion-proof grade Exd II CT6
code	Length of remote transmission device
－	Unit: Meter (m) (fill in directly)
/□	Remote transmission flange model PFW、RTW、RFW、EFW(See flange model selection table)
Typical model:	SWP-ST61E RD 4 N 22 A S2 M3 B1 Nd-5m

Note: Minimum order URL/15

Online inquiry