The design of this instrument takes into account bothGB/T 11143、GB/T 5096、SH/T 0023Three standards are a versatile instrument for analyzing corrosion and corrosion of petroleum products.

This instrument can be used according to national standardsGB/T 11143Evaluation of the rust prevention ability of mineral oil, especially turbine oil, when mixed with water to iron components using the "Test Method for Rust Prevention Performance of Mineral Oil with Inhibitors in the Presence of Water"; It can also be used according to national standardsGB/T 5096Copper Corrosion Test Method for Petroleum Products and Industry StandardsSH/T 0023The Silver Corrosion Test Method for Jet Fuel is used to evaluate the degree of corrosion of petroleum products such as aviation gasoline, kerosene, aviation turbine fuel, automotive gasoline, agricultural tractor fuel, washing solvents, kerosene, distillate fuels, and lubricants on copper and silver.

1、 Main technical features

1This instrument is a three in one, multi-purpose rust and corrosion tester with high cost-effectiveness.

2Using a digital temperature controller, heater, and electric stirrer to form a constant temperature bath, the temperature inside the bath is uniform; Equipped with a timer for time control and automatic timing during sample testing.

3Equipped with standard color palettes imported from the United States, meeting the requirements for testing and comparison.

2、 Main technical parameters and indicators

1Power supply voltage:AC220V±10%、50Hz；

2Temperature sensor: Industrial platinum resistance, with a division number ofPt100；

3Temperature control range:0～100)℃ can be set arbitrarily;

4Temperature control accuracy: ±1℃；

5Temperature display mode:LEDDigital display;

6Temperature controlled heating power:600W；

7Auxiliary heating power:1000W；

8Time control range:1Divide~24Hours can be set arbitrarily;

9Time display method:LEDDigital display;

10Sample well:4One;

11Environmental temperature: Room temperature~35℃；

12Relative humidity: ≤85％；

13Power consumption of the whole machine: not greater than1800W.