Selling sewage tank gas collectionEquipment advantages

1. The cover plate is divided into small pieces for easy manual handling during disassembly.

2. Sealing connections should be made between each small cover plate and between the cover plate and the top surface of the pool to prevent odor leakage.

3. Excellent corrosion resistance: All resins are excellent in corrosion resistance, and the finished product has good mechanical properties.

4. Excellent insulation performance: Due to the low thermal conductivity of fiberglass, this fiberglass equipment can achieve good insulation performance without the need for additional insulation structures.

5. Lightweight and high-strength, easy to install: The specific gravity of fiberglass products is only 1/3 to 1/4 of steel, yet their strength is very high. Therefore, the transportation and installation of fiberglass equipment are very convenient.

6. Low operation and maintenance costs: Fiberglass products themselves have good corrosion resistance and do not require regular anti-corrosion and other maintenance like metal products. Obviously, the maintenance cost has been greatly reduced during the operation of the equipment.

Selling sewage tank gas collectionInstallation process

Size——Cleaning up debris by the pool - hoisting in place - overlapping and fixing - adjusting and inspecting - installing and fixing - sealing - cleaning and maintenance

1. Measure the size and quantity of the pool mouth and arch cover plate, and classify them accordingly

2. Clean up the debris on the edge of the pool that needs to be installed, ensuring that the edge is flat and without any unevenness

3. Use a crane to lift the arch shaped cover plate above the pool entrance, place it from one side of the pool entrance, fix the feet on both sides of the cover plate first, and fix it to the edge of the pool with expansion bolts

4. Arrange the cover plates in sequence with a crane, drill holes at the flange connection of every two cover plates, apply sealant, and fix them with bolts

5. Connect the cover plates in sequence, drill holes at the flange on both sides of the blocking plate, apply sealant and connect with bolts

6. After installing all cover plates and blocking plates, open an observation window at the cover plate and open the exhaust gas collection port according to the owner's requirements

7. Check the connection of the foundation and seal it with sealant to prevent gas from escaping

8. Clean up residual corner materials on site

Contact: Manager Yao mobile phone:18831897799