Sensor microcomputer controlled carbon dioxide incubator

Sensor microcomputer controlled carbon dioxide incubatorProduct Features

user-friendly design
Large screen LCD display, multiple sets of data displayed on one screen, menu style operation interface, simple and easy to understand, convenient to operate. （Type II)
Stackable placement (two layers), easy to fully utilize laboratory space, microcomputer controller, control, stainless steel inner liner and partition, four corner semi-circular transition, shelf bracket can be freely installed and removed, easy to clean the studio.

UV sterilization system
The ultraviolet sterilization lamp is located on the back wall of the box and can regularly disinfect the inside of the box. It can effectively kill the circulating air and steam floating bacteria in the humidification tray inside the box, thereby effectively preventing contamination during cell culture.

Door temperature heating system
The CO2 incubator can heat the door to raise the temperature of the inner glass, effectively preventing condensation water from the glass door and preventing the possibility of microbial contamination caused by condensation water from the glass door.

FasterCO2 concentration recovery rate (Type II has this function)
infrared sensorThe monitoring of CO2 concentration is not affected by temperature and humidity. When frequent opening of the box door is required during the experiment, infrared sensors are the best choice. If the door is opened for 30 seconds and then closed, it can recover to the set temperature of 37 ℃ within less than 10 minutes, and recover to the set CO2 concentration of 5% within less than 5 minutes of potassium. Even in situations where multiple people need to frequently open and close the door, it can still maintain the stability and uniformity of the CO2 concentration inside the box.

Configure a dedicated two-stage pressure reducing valve for the carbon dioxide incubator to effectively ensure intake pressure

Independent temperature limit alarm system (optional)
If the temperature exceeds the limit, the operation will be automatically interrupted and an audible and visual alarm will be triggered to alert the operator. Ensure the safe operation of the experiment without any accidents.

Convenient data processing (optional)
haveUSB or RS485 interface, can be connected to printers or computers, and can record changes in temperature parameters. (Optional)

Optional Accessories
Independent temperature limit alarm system——————￥248.00
Humidity monitoring system————————￥3500.00