Product List:

1One servo motor

2One servo drive

3One encoder cable（3Rice)

4One motor power cord（3Rice)

5、25One core parallel port connector

6One manual

Motor materials

1. The aviation socket uses a heavy-duty brand (gold-plated)
2. The use of enameled wire180T, high temperature resistance180linear measure
3. The rare earth permanent magnet material is used by a listed company in Jiangxi, with the model numberSH-TThe difference in magnetic flux between each block shall not exceed1%(Stability), in 150High temperature oven baking2For an hour, repeat three times, and then test forever Magnetic material, demagnetization rate not exceeding3%

Servo drive model:DSD23
Power: The servo drive is compatible with a power of1.2KW~2.6KWelectrical machinery
The independently developed new generation fully digital AC servo drive mainly adopts the latest digital signal processorDSPTechnology and large-scale programmabilityFPGATechnology centered computing unit and intelligenceIPMThe power module has a series of advantages such as fast response speed, complete protection, and high reliability.
The speed regulation ratio is1：5000It has stable torque characteristics from low speed to high speed
Control positioning accuracy±0.01%,300%Overload capacity
Using space vector control algorithm, compared to ordinarySPWMGenerate greater torque and lower noise
Complete protection functions: overcurrent, overvoltage, overheating, and encoder failure
Multiple display functions: including motor speed, motor current, motor position, position deviation, number of pulses, pulse frequency, linear velocity, input/output interface diagnosis, historical alarm records, etc
DSD10The servo drive is a base mounted servo drive
Storage conditions:When storing servo drives in an unpowered state, please store them within the following temperature range:-20 ～ +85 ℃installation site
Environmental conditions inside the control cabinet:
1.Environmental temperature of servo drive:0~ 55
2.℃Humidity:90%RH
3.Below (relative humidity)Vibration:
4.4.9m/s2
5.Do not experience freezing, condensation, or other phenomena45 To ensure long-term reliability, please use below℃
Used under ambient temperature conditionsInterface with analog command input circuit:The analog signals are speed command signals and torque command signals, with a command input impedance of approximately40kΩThe maximum allowable voltage for the input signal is±10VInterface with input circuit:Connect using relay or open collector transistor circuits. When using a relay connection, please select a relay for small currents. If a small current relay is not used, it will cause poor contact. Interface with bus driver output circuit:2Convert the encodereach other(AXiang,Beach other)Pulse output signal(PAO、/PAO、PBO、/PBO)Pulse signal at the origin(PCO、/PCO)Output through the bus driver output circuit. Usually used when constructing a position control system on the upper device side. On the upper device side, please use a line receiving circuit to receive. Interface with output circuit:
The output signals for servo alarm, servo readiness, and other sequences are composed of optocoupler output circuits. Connect using relays and wire receiving circuits.
automatic tuning5By adopting the inertia identity function of a new algorithm and30Selection of tuning characteristics

By setting the level of responsiveness or utilizing the automatic saving function of parameters, it is possible to achieve automatic tuning that improves responsiveness.
Control mode switching

Position control, speed control, and force distance control.
Countermeasures for high-order harmonic generation in power supplyStandard equipment includesDC