summary:

The drop testing machine adopts a chain drive to drive the drop arm to extend and lower. The drop height is measured by a digital height ruler, which is precise, intuitive, and easy to operate. The drop arm rises and falls smoothly, and the drop angle error is small. This machine is mainly used to simulate the degree to which packaging is affected during actual transportation in the laboratory, in order to evaluate the rationality and suitability of packaging design.

Standard:

This instrument complies with the requirements of GB/T4857.5 and ISO2248 standards.

Technical indicators:

1. Power supply: AC380V 50HZ

2. Power: 1.85KWA

3. Drop height mm: 400-1500

4. Maximum weight measured in kg: approximately 60kg;

5Maximum size of test piecemm: About600x600x600(Refers to the fact that both sharp and angular surfaces can undergo drop testing. If only surface drop testing is performed, the box volume can be much larger.)

6Impact panel sizemm：1250x1700mm

7. Arm size: enlarged to meet the requirements of falling corners of the box

8. Drop error: plus or minus 10mm

9Dimensions of the test benchmm: About1700 x1250x 2350mm

10. Weight kg: approximately 600kg;

System composition:

One drop testing machine host

One power control box