Slurry Separation Grinding Machine (Vertical)

Product Introduction:

Pulp residue separation and pulping machine can help you grind and deslag beans at one time, produce rich soybean milk, and separate soybean residue like snowflakes. It is suitable for processing tofu, dried tofu, tofu pudding, soybean milk, etc. Special waterproof device for motors, can be used for multiple purposes

Usage: It has various functions such as grinding rice, beans, soaking soft items, and grinding. This machine has the advantages of small size, light weight, low noise, saving personnel and electricity, stable performance, reliable quality, easy cleaning, and convenient movement;

It is currently an efficient and fast processing equipment for soy products, saving manpower and eliminating the process of manual slag separation. Reasonable structure, beautiful appearance, and easy operation. The machine parts have been rigorously tested to meet national standards. Suitable for large, medium, and

Ideal grinding equipment for small-scale soy product factories, government agencies, military units, schools, factories, canteens, and individual professional households to process and produce various soy based foods.

Operating instructions:

Soaking material:Carefully remove iron, sand, and stone debris from the material, and soak it in warm water at 50 ° C until there are no hard cores (no depressions in the Douban)

Start:Referring to the structural diagram, loosen the locking nut, adjust the handle to rotate in the coarse direction until there is no obstruction when gently pushing out the exposed filter frame of the slag mouth by hand, and the rotation is flexible, then the motor can be started

Adjust the gap:Adjust the handle in a thinner direction until you hear a slight friction sound. Do not make it too fine, as it can easily grind the bean skin, block the mesh of the filter, cause pulp in the residue, significantly reduce production efficiency, and increase electricity consumption

If the gap is too large and the slag is too high, it will also cause low productivity and material waste. (Empirical data shows that it is about 2 kilograms per kilogram of dry soybeans; if soaked well, add about 2.5 kilograms of water during operation, and weigh the wet slag to about 1.3 kilograms.)

Soybean milk concentration, slag yield, hourly yield, separation degree and other indicators are better values) In order to further improve the utilization rate of bean dregs, add water to the bean dregs, mix them into the porridge sample, pour them into the hopper, and repeat the processing

clean:After the work is completed, the filter screen and debris inside the machine should be cleaned in a timely manner to ensure good slag separation and internal hygiene. The method is as follows: ① Unscrew the fastening bolts on the feeder, remove the filter frame and clean it with a grinding wheel, and use a brush to clean the filter screen

The brush must be cleaned until there is no blockage. ② Use a cloth to wipe the inside and outside of the test machine, and do not rinse with water to prevent water from entering the motor

Product Technical Parameters: