VIP member
![Small and micro photoelectric sensor [amplifier built-in] PM-45 series PM-Y45 (PM-Y45-C3)](http://img78.mtnets.com/5/20210507/637559511057669456538.jpg)
Small and micro photoelectric sensor [amplifier built-in] PM-45 series PM-Y45 (PM-Y45-C3)
The new generation of miniature photoelectric sensors. The reliability and construction efficiency have been greatly improved.
Product details
The reliability and construction efficiency have been greatly improved!
|
 ※1
|
| ※1 | EMC Designated Applicable |
|---|
characteristic
Standard configuration includes 3 protective circuits
Although the body is small, it is standard across all models
① Power reverse protection circuit
② Output reverse protection circuit
③ Output short-circuit protection circuit.
Significantly reduced the risk caused by wiring errors.
Easy installation through M3 screws
It can be easily installed by fixing 2 M3 screws.
Please prepare M3 screws, washers, etc. separately.
Adopting our company's unique integral molding method to protect the IP64 structure
Achieved impact resistance of 15000m/s2A vibration resistant structure subjected to two durability tests (approximately 1500G, 3 times in X, Y, and Z directions) and vibration resistance of 10-2000Hz (double amplitude of 1.5mm, 2 hours in X, Y, and Z directions).
The distance between the projection and reception parts is 6mm, with a margin left
The distance between the projection and reception parts has increased by 1mm compared to previous products, leaving room for detecting changes in the position of the object.
Easy adjustment based on projection and reception markers
By controlling the projection and reception positions from the outside, it is easy to adjust the position of the detected object.
Large and clear multi angle action indicator light
Install the large action indicator light (orange) in the center of the sensor to confirm the action indicator light from all directions.
Compact and compact
The installation spacing is the same as previous products, and all models have achieved significant space saving, making it easy to replace previous products.
|
Multiple models to choose from
Up to 6 shapes can be selected according to installation conditions.
type
| type | shape (mm) |
detection distance |
Model (Note 1) | output | output action |
|---|---|---|---|---|---|
| K-type |
|
6mm (fixed) | PM-K45 | NPN open collector transistor |
Equipment with 2 outputs ON/When entering the light ON when blocking light |
| PM-K45-C3 | |||||
| t type |
|
PM-T45 | |||
| PM-T45-C3 | |||||
| L-type |
|
PM-L45 | |||
| PM-L45-C3 | |||||
| y type |
|
PM-Y45 | |||
| PM-Y45-C3 | |||||
| f type |
|
PM-F45 | |||
| PM-F45-C3 | |||||
| R-type |
|
PM-R45 | |||
| PM-R45-C3 |
| (Note 1): | The cable length for models with the '- C3' symbol at the end of the model is 3m. |
|---|
specifications
| type | Small amplifier built-in type | ||||||
|---|---|---|---|---|---|---|---|
| K-type | t type | L-type | y type | f type | R-type | ||
| model | PM-K45 | PM-T45 | PM-L45 | PM-Y45 | PM-F45 | PM-R45 | |
| detection distance | 6mm (fixed) | ||||||
| Minimum detectable object | 0.8 × 1.2mm opaque body | ||||||
| Response delay | Below 0.05mm | ||||||
| repeatability | Below 0.01mm | ||||||
| supply voltage | 5-24V DC ± 10% pulsation P-P10% or less | ||||||
| Consumption current | Below 15mA | ||||||
| output |
NPN open collector transistor Maximum incoming current: 50mA External voltage: 30V (between output and+V) Remaining voltage: 2.0V (when the incoming current is 50mA), 1.0V (when the incoming current is 16mA) |
||||||
| output action | Equipped with two types of outputs: ON when entering light and ON when blocking light | ||||||
| Protection circuit | Power reverse protection circuit Output reverse protection circuit Short Circuit Protection |
||||||
| reaction time | When illuminated: 20 μ s, when blocked: below 80 μ s (Maximum response frequency: 3kHz) |
||||||
| Work status indicator light | Orange LED (lights up when illuminated) | ||||||
| Resistance ring area sexually |
Protect the structure | IP64（IEC） | |||||
| Environmental temperature for use | -25~+55 ℃ (note not to condense or freeze), during storage:- 30～＋80℃ | ||||||
| Environmental humidity for use | 5-85% RH, during storage: 5-95% RH | ||||||
| Use environmental illumination | Fluorescent light: Light receiving surface illumination of 1000lx | ||||||
| withstanding voltage | AC1000V 1 minute between all power connection terminals and the casing | ||||||
| insulation resistance | Between all power connection terminals and the casing, with a resistance of 50M Ω or higher, based on a DC250V high impedance meter | ||||||
| Vibration | Frequency range of 10-2000Hz, double amplitude of 1.5mm, X, Y, and Z directions for 2 hours each | ||||||
| Impact resistance | Acceleration 15000m/s2(Approximately 1500G) 3 times each in the X, Y, and Z directions | ||||||
| Projection element | Infrared LED (peak wavelength of 855nm, non modulated) | ||||||
| material | Shell: PBT、 Display cover: polycarbonate | ||||||
| cable | 0.09mm24-core rubber cable, 1m long | ||||||
| Cable extension | 0.3mm2The above cables The total length can be extended to 100m |
||||||
| weight | Body weight: approximately 10g (3m cable length type: approximately 30g) Packaging weight: approximately 15g (3m cable length type: approximately 35g) |
||||||
(Note 1): The measurement condition when not specified is that the operating environment temperature is 23 ℃.
dimension
- unit mm
PM-K45(-C3)
|
PM-T45(-C3)
|
PM-L45(-C3)
|
PM-Y45(-C3)
|
PM-F45(-C3)
|
PM-R45(-C3)
|
purpose
|
|
|
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-