Small portable roughness meter Pocket SurfBrief Introduction
German Pocket Surf Small PortableRoughness testerAny one of the four parameters: Ra,Rmax/Ry,Rz, And they can choose to replace each other; Within the range of 0.8mm/0.03in, the lateral displacement length can be selected as 1, 3, or 5 cut-off points; Measurements can be taken in horizontal, vertical, or inverted positions; The probe has four switching positions - axial (overlapping with X-axis), 90018002700; Even surfaces that are difficult to reach, such as inner and outer diameters, can still be measured.
Small portable roughness meterPocket SurfInstrument features
- A portable roughness meter that is pocket sized, cost-effective, and capable of measuring roughness on various surfaces. It is commonly used in production lines, workshops, and laboratories.
- Made firmly, the shell is made of wear-resistant cast aluminum, and even after years of use, the surface measurement is still accurate and reliable.
- Can measure any of the following four parameters: Ra,Rmax/Ry,Rz, And can choose to replace each other
- Within the range of 0.8mm/0.03in, the lateral displacement length can be selected as 1, 3, or 5 cut-off lengths
- Measurements can be taken in horizontal, vertical, or inverted positions.
- The probe has four switching positions - axial (overlapping with X-axis), 900, one hundred and eighty0, two hundred and seventy0
- Even surfaces that are difficult to reach, such as inner and outer diameters, can still be measured.
- The integrated data output on the SPC processing device is compatible with most commonly used data processing systems.
- Easy to recognize LCD reading display, for roughness measurement values in micro inches or micrometers, they can be displayed half a second after crossing the surface horizontally.
- When encountering situations such as "out of range" or "low voltage", a prompt will also appear on the screen
Small portable roughness meterPocket Surftechnical parameter
size |
140mm*76mm*25mm/5.5in*3in*1in |
weight |
435g |
measuring range |
Ra0.03mm to 6.35mm/1min to 250min |
Display resolution |
0.01mm/1min |
measurement accuracy |
Meets ASME-B46.1, ISO, DIN standards, and MIL requirements |
Digital display |
LCD; Also displayed; Batterylow signal: H and L (measured values out of range) |
Detecting movement speed |
5.08mm/. 2 per second |
end |
0.8mm/.30 in ASME 2RC |
Probe type |
Piezoelectric type |
Maximum force of probe |
15.0mN/1500mfg |
Battery capacity |
Disposable alkaline battery, 9V |
Battery capacity |
Approximately 2500 measurements, but depending on the frequency of use and output times, an external power supply can also be used |
working temperature |
100- 450C/500- 1130F |
Storage temperature |
-200- 650/-40- 1490F |
parameter
|
Detection length (nominal)
|
Scope of evaluation
|
Number of cut-off/conversion positions
|
Ra/Ry
|
2.0mm/.075 in
|
0.8mm/.030 in
|
1
|
3.5mm/.135 in
|
2.4mm/.090 in
|
3
|
|
Ra/Rz/Rmax
|
5.0mm/.195 in
|
4.0mm/.150 in
|
5
|
EMD-1500-311 EGH-1019 probe 90010mm radius, PMD-90101 calibration sample