Soil grinderProduct Introduction:

The TS series four tank high-energy planetary ball mill can be used for dry grinding, wet grinding, and vacuum grinding. It is an essential device for mixing, fine grinding, sample preparation, nano material dispersion, new product development, and small-scale production of high-tech materials. The TJ series four tank high-energy planetary ball mill is used for rapid batch grinding of research samples to a gelatinous fineness (as small as 0.1 μ m) in higher and vocational colleges, research institutions, and enterprise laboratories, and for mixing, homogenization, and dispersion. Widely used in scientific research and industrial sectors such as geology, soil, metallurgy, electronics, power, materials, chemical engineering, medicine, beauty, environmental protection, ceramics, glass, nuclear research, etc.

Soil grinderworking principle:

Four planetary gears are installed on the same sun gear, and ball mills are installed on the planetary gears. When the turntable rotates, the ball mills rotate around the sun gear shaft and perform a planetary motion. Due to the design of geometry and transmission ratio, the grinding ball can move along an ideal trajectory. The grinding ball moves along the inner wall of the grinding tank until under certain special conditions, the grinding ball suddenly breaks away from this motion state. Passing through the grinding ball, the sample and grinding ball are washed onto the opposite direction of the tank wall. The energy generated during the impact process is several times that of a regular ball mill. The result was a good grinding effect and extremely short grinding time This product can be ground and mixed using both dry and wet methods for products with different particle sizes and materials. The smaller particle size of the ground product can reach 0.1 microns (i.e. 1.0 × 10-4mm)

Soil grinderPerformance advantages:

The tightness of the main belt can be adjusted, and it is not easy to slip even after long-term use, greatly extending its service life.

The appearance of the box is foldable (or door opening), easy to operate, and the cover is equipped with a safety switch, which is safe and reliable.

Compact structure, beautiful appearance, and stability, truly achieving complete integration of the whole machine.

The bottom of the instrument is supported by a steel plate, which enhances the stability of the instrument and avoids "deviation" during the grinding process

Adopting a tension pulley belt transmission, the noise and wear are minimized, and there will be no gear breakage or damage during operation, greatly extending the service life.

The frequency converter is installed on a detachable board for easy inspection and maintenance

The center hole distance between the sun gear and planetary gear is 9-13cm, which can be adjusted at the factory

Main technical parameters:

Application of crushing, mixing, homogenization, nano grinding, mechanical alloys

Application areas: electronic materials, soil, aerospace materials, batteries, ceramics, biology, geology and minerals, metallurgy

Sample characteristics: Soft, hard, brittle, fibrous - dry or wet

Working principle: Impact force, friction force

Larger injection size<10 mm

Discharge particle size * about 0.1 microns

Number of grinding platforms 4/2

Speed ratio setting 1: -2.2 (can be designed according to requirements)

The sun gear rotates at a speed of 30-40 revolutions per minute

Effective sun gear diameter 360mm

Grinding kit material: hard and rigid, stainless steel, tungsten carbide, agate, corundum, zirconia, silicon nitride, polyester

Grinding jar size 12 ml -500 ml

Customizable size 4-25L (can be designed according to requirements)

Crushing time setting hours: 0-99, minutes: 0-59

Intermittent drive is possible, reverse rotation is possible

Drive power 1.5 kW

Operation method:

1. Ball milling tank: Usually, the weight of the four ball milling tanks (tank+matching ball+sample+auxiliary material) should be basically the same to maintain smooth operation, reduce noise caused by vibration, and extend the service life of the equipment. If the sample is insufficient, symmetrical use (only two cans) is also acceptable.

2. Sample: The diameter of the sample is usually less than 1 millimeter, solid particles generally do not exceed 3 millimeters, and soil is allowed to be 10 millimeters.

3. Loading: The larger volume of loading (sample+ball+auxiliary material) is two-thirds of the volume of the ball milling tank, and the remaining one-third is used as operating space.

4. Rotational speed: In order to achieve the desired effect, parameters such as rotational speed, ball milling time, ball matching (reasonable combination of large and small balls), sample size, quantity, and addition of auxiliary materials should be selected appropriately. High speed may not necessarily result in high efficiency. At the beginning of grinding, the rotation speed can be increased (to crush the sample), and after a period of grinding (usually not exceeding 2 minutes), the rotation speed can be reduced to increase the ball milling efficiency. The efficiency of ball milling depends on the appropriate combination of ball size, sample properties, particle size, weight, rotational speed, and operating mode. To improve grinding efficiency and extend the service life of the ball mill, it is not necessary or advisable to set the speed too high.

model	Specifications	Can be equipped with a ball mill jar		remarks
		Specification (ml)	Quantity (only)
TS-0.4L	0.4L	50-100	4	Can be equipped with a 50ml vacuum ball mill jar
TS-1L	1L	50-250	4	Can be equipped with a 50-100ml vacuum ball milling jar
TS-2L	2L	50-500	4	Can be equipped with a 50-250ml vacuum ball milling jar
TS-4L	4L	50-1000	4	Can be equipped with 100-500ml vacuum ball milling jar
TS-8L	8L	500-2000	4	Can be equipped with 250-1000ml vacuum ball milling jar
TS-12L	12L	1000-3000	4	Can be equipped with 500-2000ml vacuum ball milling jar
TS-16L	16L	1000-4000	4	Can be equipped with 500-3000ml vacuum ball milling jar
TS-20L	20L	1000-5000	4	Can be equipped with 1000-4000ml vacuum ball milling jar
TS-40L	40L	4000-10000	4	Can be equipped with 3000-9000ml vacuum ball milling jar
TS-60L	60L	6000-15000	4	Can be equipped with 5000-13000ml vacuum ball milling jar
TS-100L	100L	10000-25000	4	Can be equipped with 9000-20000ml vacuum ball milling jar

model	Power Supply	Motor power KW	Inverter power KW	Continuous operation time (hours)	Selection of cycle for alternating forward and reverse operation (min)	Speed r/min		Noise ≤ db (A)
						Revolution (adjustable)	Rotation (adjustable)
TS-0.4L	220V 50HZ	0.55	0.55	1-9999	1-9999	30-450	60-900	《60db
TS-1L	220V 50HZ	0.75	0.55	1-9999	1-9999	30-400	60-800	《60db
TS-2L	220V 50HZ	1.1	0.75	1-9999	1-9999	30-400	60-800	《60db
TS-4L	220V 50HZ	1.1	0.75	1-9999	1-9999	30-400	60-800	《60db
TS-8L	220V 50HZ	1.5	1.5	1-9999	1-9999	30-280	60-560	《60db
TS-12L	380V 50HZ	1.5	2.2	1-9999	1-9999	30-260	60-520	《60db
TS-16L	380V 50HZ	2.2	2.2	1-9999	1-9999	30-260	60-520	《60db
TS-20L	380V 50HZ	3.0	4	1-9999	1-9999	30-230	60-460	《60db
TS-40L	380V 50HZ	3.0	4	1-9999	1-9999	30-180	60-360	《70db
TS-60L	380V 50HZ	4.0	5.5	1-9999	1-9999	30-170	60-340	《70db
TS-100L	380V 50HZ	7.0	7.5	1-9999	1-9999	30-160	60-320	《70db