product overview

Measuring soil water content with affordable pricingA clever 10HS sensor for soil moisture. This sensor is integrated on-site in most soil conditions to verify the 10HS sensor and 12 bit A/D, providing ± 3% accuracy and ± 2% accuracy for soil specific calibration. The 10cm exploration measure helps to increase the soil moisture capacity by achieving an average of any soil variability. The reading is directly provided based on the water content in the capacity. The high-frequency design of this sensor gives it a low sensitivity to salt and texture effects and a wide measurement range.

Product Features

Measure the size of the soil1 liter capacity, providing a more accurate picture of average soil moisture

Provide data directly on water content in capacity

sensorUsing a high-frequency method that provides good accuracy even in high salt and sandy soils(70 MHz) circuit.

Compatible with initial independent and Internet based weather stations

S-SMD-M005 sensor functionsoutdoorEnvironment

The S-SMD-M005 sensor supports the following measurements: soil moisture

measuring range
In soil:0 to 0.570 m ³/m ³ (capacity water content)

Accuracy:± 0.033 m ³/m ³ (± 3%) Typical 0 pairs+50 ° C (+32 ° C+122 ° F) for mineral soils determined by 10 dS/m
± 0.020 m ³/m ³ (± 2%) based on soil specific calibration

Resolution:±0.0008 m ³ /m ³ (±0.08%)

Dimension of soil probe:160 x 32 x 2 millimeters (6.5 x 1.25 x 0.08 in.)

Weight:190 grams (6.7 ounces)

Decagon probe part number: 10HS

Sensor operating temperature:
0 ° to+50 ° C (+32 ° to+122 ° F). Although sensor probes and cables may safely operate at temperatures below freezing point (to -40 ° C/F), and clever sensor tubes (electronic placement), the white portion of the sensor cable can be exposed to temperatures determined by+70 ° C (+158 ° F), soil moisture data collection at these extreme temperatures is outside the accurate measurement range of the sensor. Extending the temperature above+50 ° C (+122 ° F) will reduce the battery life of the logger when used with the clever sensor S-SMD-M005.

For each sample: 12

Number of data channel: 1

The average is the selected measurement: deny

Chain length can be utilized:5 m (16 ft)

sensorLength of network cable:0.5 m (1.6 ft)

If you need to know more about the product details, you can contact the sales personnel of Xi'an Saimo Rui Environmental Technology Co., Ltd. The contact information can be found at the bottom of the website.