CKY-208Pressure transmitters are specially designed and manufactured to address harsh environments such as clogging of pressure holes and strong vibrations caused by mud during oilfield drilling and logging. The transmitter adopts an ion beam sputtering thin film pressure sensor as the sensitive element, which is integrated with the electronic circuit to produce an output4-20mAStandard signal. This model of pressure transmitter is a fully stainless steel cylindrical flat membrane structure, which is easy to use. Especially suitable for industrial sites such as oilfield logging, pharmaceuticals, textiles, etc. where viscosity is prone to blockage and strong vibration. And it has achieved good application results in domestic oil fields.
measured media
|
Gases, liquids, and vapors
|
pressure type
|
gauge pressure
|
Range
|
0~10Mpa -100Mpa optional
|
Power supply`
|
12~36 DC (standard 24V DC)
|
output signal
|
4~20mA (2-wire system)
|
Accuracy
|
± 0.1% FS, ± 0.25% FS, ± 0.5% FS
|
Temperature drift effect
|
±0.02%FS/℃
|
Annual stability
|
0.2% FS/year
|
insulation resistance
|
≥500MΩ(100V DC)
|
ambient temperature
|
-20~85℃
|
medium temperature
|
-40~85℃/125℃
|
Relative temperature
|
0~90% RH
|
Overload capacity
|
200%FS
|
Connection method
|
M20 × 1.5, 1/2NPT
|
Liquid receiving material
|
Diaphragm 17-4PH; Process connector 1Cr18Ni9Ti
|
Lead method
|
Cable lead out
|
protection grade
|
IP65
|
Explosion proof grade
|
ExiaⅡCT6
|
service life
|
10×107
|
Weight
|
300g
|
Technical features:
High temperature, high pressure, high precision, and high stability;
Anti vibration, impact, and corrosion-resistant all stainless steel anti blocking structure;
The flat membrane of the transmitter directly contacts the medium without isolation, and the temperature effect is small.
Mud, coal slurry, crude oil and other viscous media;
Oil extraction, monitoring, and control systems;
Mud pump and drilling riser pressure monitoring;
Pressure monitoring on concrete mixing and pouring site