Stainless steel sampling truckMade of stainless steel plates or components. Stainless steel sampling truck is a vertical unidirectional flow local air purification equipment widely used in industries such as medicine and health, biological products, food, electronics, etc. for sampling and cargo transfer. The stainless steel sampling vehicle mainly uses a centrifugal fan system to suck in air, and thenmedium efficiency filterreachHigh efficiency filterThe laminar flow hood evenly outputs clean air into the work area to achieve the required purification level, and is equipped with an uninterruptible power supply for easy sampling and use.

The product structure of the stainless steel sampling vehicle is composed of stainless steel plates or spray coated steel plates, controlled by a computer with light touch points. The fan has stepless speed regulation, and the air volume can be adjusted freely. It is equipped with ultraviolet sterilization lamps. The specifications and dimensions of the sampling vehicle can be customized according to customer requirements. The price of stainless steel sampling vehicles is higher than that of steel plate baking paint sampling vehicles.

Application of stainless steel sampling vehicle:
The stainless steel sampling cart is suitable for sampling raw materials used in drug preparations and sterile preparations. Stainless steel sampling truck is widely used for sampling raw materials in special occasions in industries such as medicine, pharmaceuticals, electronics, precision instruments, meters, and food. According to GMP standards, the sampling vehicles produced by Zijing achieve a cleanliness level of 10000, and the computer components used comply with GB-1497-85 (electric safety standard); Complies with the provisions of GB-191 (packaging standard).

Principle of Stainless Steel Sampling Vehicle:
When in use, fix the sampling vehicle, turn on the power, turn on the power and fan switch, the fan starts working, adjust the voltage (usually 220V), wait for the sampling vehicle to run for 15 minutes, and then put it into the sampling bucket. After the sampling is completed, turn off the fan and power, and move the sampling vehicle to its original location. The fan starts working, adjust the voltage appropriately (usually 220V), wait for the clean sampling vehicle to run for 15 minutes, and then put it into the sampling bucket; After the sampling is completed, remove the sampling bucket, turn off the fan and power, unplug the power cord, and move the sampling vehicle to its original position.

Instructions for using stainless steel sampling truck:
Move the sampling vehicle to the location where it needs to be sampled, fix the sampling vehicle, turn on the power, turn on the power and fan switch, the fan starts working, adjust the voltage (usually 220V), wait for the sampling vehicle to run for 15 minutes, and then put it into the sampling bucket. After the sampling is completed, turn off the fan and power, and move the sampling vehicle to its original location.

Instructions for using stainless steel sampling truck:
1. Please use a clean sampling vehicle in an environment with a room temperature not exceeding 50 ℃.
2. For the environmental requirements of the purification work area, efforts should be made to avoid actions that significantly disrupt the airflow pattern. It is strictly prohibited to store unnecessary items in the work area to maintain a clean airflow pattern without interference.
3. When using a clean sampling vehicle for the first time, it is necessary to first clean the clean sampling vehicle and the surrounding environment. Ultra clean vacuum cleaners or tools that do not produce fibers should be used, and then drug sterilization or ultraviolet sterilization should be used for sterilization treatment.
4. Regularly measure the average wind speed in the work area with an anemometer. If it does not meet the technical specifications, adjust the voltage regulator handle and change the input voltage of the fan to keep the clean sampling vehicle in working condition.

Sampling vehicle installation confirmation:
Appearance: The paint surface should be smooth and flat, with no peeling or detachment of the coating. The decorative curtain should be smooth, vertical, and free of damage. Inspection method: Visual inspection.
Check whether the unpacking inspection meets the requirements and establish a complete equipment file.
Check if the SOP for the use of the equipment has been drafted and if appropriate training has been provided to the users.

Sampling vehicle operation confirmation:
Wheels: flexible and reliable. Inspection method: Visual inspection and manual testing.
Illuminance: The illuminance at each point shall not be less than 300Lx. Inspection method: The illuminance at a height of 60cm from the ground shall be measured by an illuminance meter at three points, with three measurements taken at each point.

Purification efficiency of sampling vehicle:
Dust particle count: The number of particles larger than 5.0 μ m is less than 20000/m3, and the number of particles larger than 0.5 μ m is less than 3500000/m3. Inspection method: Adjust the wind speed to low, medium, and high levels, and test with a dust particle counter at a height of 80cm-100cm from the ground. Measure three points per level, and measure three times at each point.
Settling bacteria: ≤ 10 settling bacteria, measured at three points, each point measured three times.
Pressure difference: The pressure difference between the inside and outside of the vehicle is greater than 10Pa. Inspection method: Use a micro differential pressure gauge to measure the pressure difference at three points, with three measurements taken at each point.

Requirements for after-sales service time of purification equipment:
Whether it is paid after-sales service or free after-sales service, customers provide feedback on equipment after-sales issues to Zijing. After our company provides a solution and the customer confirms the solution:
1. Arrive at the site within 24 hours within the Pearl River Delta and Yangtze River Delta to solve after-sales service problems;
2. In other areas, it is generally within 48 hours to arrive on-site to solve after-sales service problems, while in special remote areas, it is up to 96 hours to arrive on-site to solve after-sales service problems.
Original source: Guangzhou Zijing http://www.zj-filter.com/ Li Gong (139-2875-8616)