1、 Product Overview

The stainless steel meter box produced by Zhejiang Zhenghong Electric Co., Ltd. is made of cold-rolled steel plates or stainless steel plates bent and welded together. It is equipped with movable knock off holes on the upper and lower sides of the shell and sealed with covers.Install grounding terminals inside the box to facilitate user wiring in the junction box. The stainless steel meter box body is equipped with an installation base plate, on which users can install various electrical equipment. The meter box door can be opened at a greater than 90 degrees.The overall design is reasonable and the construction is scientific to ensure the safe operation of power grid equipment. Stainless steel meter box also has many good characteristics, such as explosion-proof, moisture-proof, dust-proof, high temperature resistance, anti-aging, impact resistance and flame retardant.The appearance looks very smooth and has undergone rust prevention treatment. The exterior is coated with electrostatic spraying, and the color of the stainless steel distribution box shell can be customized according to user needs. And the internal wiring layout of the box can also be doneCustomized by the customer.

2、 Scope and conditions of use

Stainless steel distribution boxes are suitable for use in strong acidic and alkaline environments according to environmental requirements, and have been widely used in outdoor distribution systems such as the State Grid. Stainless steel distribution box hasStrong corrosion and rust resistance, with a protection level of IP65. Stainless steel materials 201, 304, and 316 can be made according to user needs and welded using argon arc weldingIt is welded by technology and polished on the surface to ensure a beautiful appearance. It can be divided into outdoor waterproof wall mounted, outdoor waterproof floor mounted, and indoor wall mounted types.
The size of the stainless steel distribution box can be customized according to customer requirements, with a variety of styles for you to choose from. Different electrical performance control systems can be installed according to your needs, such as metering electricityMeter box, air conditioning control box, street light control box, outdoor waterproof box, dual power control box, isolation switch box, and water pump control box, etc.

threeInstallation method

It can be directly fixed on the wall or utility pole, suitable for assembling any specification of mechanical or electronic meter, and can be equipped with leakage switch DZ47 or RCL fuse and isolation switch. The electricity meter and switch are separated separately,
Users can control the switch, the circuit is not exposed, and it has anti-theft function.
Please check the integrity of all components of the meter box before installation.
The electric meter box should be installed vertically, with a tilt angle not exceeding 54 °.
The installation location should be chosen in a place where there is no severe vibration or impact that is insufficient to corrode the components.
The installation of the electric meter box should be carried out in a cool and dry place, avoiding direct sunlight for a long time to extend the service life of the electric meter.
According to the installation hole position, drill holes in the corresponding wall position for installation, place the expansion pipe, then fix the base to the wall and cover it with a lid.

fourOrdering Notice

Stainless steel distribution boxes are all customized products that can be customized according to customer needs.