Frame submersible mixer, plate frame mixer, low-speed frame blade mixer, pharmaceutical wastewater frame mixer

Product features of frame mixer:

　　1) The frame mixer homogenization and emulsification device can directly reach the bottom of the kettle and can use the internal circulation of the emulsification head for emulsification. By using a high-speed emulsification device combined with slow scraping, the raw materials will form a strong circulating floc flow without dead corners. The product can be fully mixed, emulsified, dispersed, and homogenized, forming a good and uniform molecular structure. This type of emulsification system has better emulsification effect than traditional ones.

　　2) The sandwich structure can directly perform heating and cooling functions, with a spiral guide plate inside for more thorough cooling of the material during cooling.

　　3) Rotary vane vacuum pumps are not only used for raw material suction, but also save manpower. Adopting vacuum suction, especially for powder materials, to avoid dust flying. The entire process is carried out under vacuum conditions to prevent the formation of bubbles in the material after high-speed mixing, which meets the requirements of hygiene and sterility. It can also be used to remove bubbles, making the product structure more compact and glossy, and achieving a longer shelf life. Water sealed pumps do not produce oil or gas and are suitable for GMP factory standards.

　　4) The slow scraping blade combined with PTFE material scraper can scrape off the raw materials on the pot wall, allowing them to mix completely and achieve a complete stirring effect. A circular flow forces the material to surround the inner wall of the mixing container for heat exchange during the heating and cooling stages, and to avoid damage to the material due to overheating or undercooling.

　　5) Scrapers can be disassembled and assembled without tools, and cleaning and maintenance work can be carried out.

　　6) The pot lid device is equipped with waterproof and dustproof floodlights and mirrors, making it easy to observe the production situation.

　　7) The frame mixer is equipped with safety protection devices, such as vacuum safety devices, three-phase power safety devices, interlayer pressure safety valves, emergency stop buttons, etc., to ensure safe operation.

　　8) The frame type mixing unit is manufactured in full compliance with GMP requirements and is currently the ideal washing and maintenance production equipment.

Application fields of frame mixer:
Frame mixers typically operate at low speeds and do not generate significant shear forces when stirring low viscosity liquids, making them unsuitable for liquid-liquid and gas-liquid dispersion. On the other hand, this type of impeller moves at a high flow rate inside the tank, with horizontal swirling flow dominating and lacking good mixing uniformity. However, the flow velocity near the tank wall can achieve a higher heat transfer film coefficient than other impellers, making it commonly used for heat transfer and crystallization operations. In addition, due to the large diameter of the blade and its proximity to the bottom of the tank, it is also commonly used to stir high concentration slurries and precipitating slurries. It is also commonly used for stirring high viscosity fluids.

Main structure of frame mixer:

1. High speed ratio and high efficiency
Single stage transmission can achieve1: A reduction ratio of 87, with an efficiency of over 90%. If multi-stage transmission is used, the reduction ratio will be even greater.

2. Compact structure and small volume
Due to the use of planetary transmission principle, the input shaft and output shaft are on the same centerline, allowing the model to achieve the smallest possible size.

3. Smooth motion with low noise
Cycloid needle teeth have a large number of meshing teeth, a high overlap coefficient, and a mechanism of mechanical balance, which limits vibration and noise toTo a lesser extent.

4. Reliable use and long lifespan
Due to the use of high carbon chromium steel material for the main components, which has undergone quenching treatment to obtain high strength, and the use of rolling friction for some transmission contacts, it is durable and has a long service life.

5. Reasonable design and easy maintenance
Easy to disassemble and install, with a large number of parts and simple lubrication, the cycloidal gear reducer is highly trusted by users.

Frame mixer product specifications:

Selection Notice for Frame Blender:

Parameters required for selection: pool type, pool length*Width * Height

Material requirements:304 stainless steel, 316 stainless steel or carbon steel anti-corrosion

Gearmotor: ordinary conventional, Guomao brand orSEW gearbox