VIP member
TEROS 06 Soil Profile Temperature Sensor
TEROS 06 Soil Profile Temperature Sensor
Product details
The TEROS 06 soil profile temperature sensor can be buried in the soil for long-term monitoring, while also obtaining temperature data from six layers. Connecting ZL6 data acquisition is simple and plug and play
Connect to ZENTRA Cloud platform for more convenient use.
main features
The temperature accuracy can reach ± 0.1 ℃
Simultaneously measuring 6 layers of depth, exceeding WMO recommended standards
The diameter is only 20 mm, minimizing interference with the soil as much as possible
The temperature sensing point is located at -5 cm- 10 cm, - 20 cm, - 30 cm, - 50 cm, - 100 cm
The sensor body is made of a material with extremely low thermal conductivity to avoid heat transfer between measurement points
The temperature sensing point is made of stainless steel material with good thermal conductivity to ensure accurate temperature measurement at the location
● Point by point calibration to achieve research level accuracy
Connect ZL6 data acquisition, plug and play. It can also be connected to other data sources.
● Connect to ZENTRA Cloud to remotely obtain data and visualize it. It can be accessed on mobile phones, tablets, and computers.
TECHNICAL INDEX
temperature |
Scope:- 20 ~ 50 ℃； |
measured depth |
5 cm, 10 cm, 20 cm, 30 cm, 50 cm, 100 cm |
output |
SDI-12Single line serial interface(DDI communication protocol, or SDI-12 communication protocol) RS-485Dual line serial interface (M12 connector only)(TensorLINK serial communication protocol, or Modbus RTU communication protocol) |
Compatible with data collection (purchased separately) |
METER ZL6Series; And a data collector that can provide 3.8-28.0 VDC power supply, and has SDI-12 communication or RS-485 Modbus RTU or TensorLINK communication interface |
size |
Length: 104.0 cm； Diameter: 2.0 cm |
Working temperature range |
–30 ~60℃ |
material |
Rod body: PA66GF30； Sensor component: stainless steel |
Cable length |
Standard: 4.5 meters; Customizable up to 75 meters (using M12 interface and extension cable) |
interface type |
3.5-mmStereo interface; 4-pin M12 plug; Customizable tin plated bare wire interface |
Supply voltage (VCC to GND) |
Minimum value: 3.9 VDC continuous; Maximum: 28.0 VDC continuous |
Digital input voltage (logic high) |
minimum:1.9 VTypical 3.6 V; The biggest:5.0 V |
Digital input voltage (logic low) |
Minimum:- 0.3 V； Typical 0.0 V; Zui Big 1.0V |
Digital output voltage (logic high) |
Typical: 3.6V |
Power line conversion rate |
Minimum 1.0V/ms |
Current (during measurement) |
minimum: 2.0 mATypical 2.5 mA; Zui Big 4.0 mA |
Current (during static testing period) |
Typical: 80 µA |
Start time（DDISerial port） |
Minimum 210ms; Zui Big 400ms |
Start time（SDI-12） |
Minimum 210ms; Zui Big 400ms |
Start Time(RS-485 ) |
Minimum 210ms; Zui Big 400ms |
Time |
Minimum 30 ms; Maximum 240 ms |
Following standards |
Produced under ISO 9001:2015 standard; EM ISO/IEC 17050:2010 (CE marking) |
Origin and Manufacturer: METER GmbH, Germany (formerly UMS)
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-