VIP member
TIME7232 (TV320) portable vibration meter
TIME7232 (TV320) portable vibration meter
Product details
|
TIME7232 (TV320) portable vibration meter
|
|
☆ Measurement range: 0.001mm~1.999mm
|
|
☆ Operating frequency: 0.01cm/s~19.99cm/s
|
|
☆ Detection accuracy: 0.1m/s2
|
|
☆ Indication error: ≤ ±5%
|
Product Introduction
----------------------------------------------------------------------
Product application:With the development of science and technology and production, the workload of mechanical equipment continues to increase, and production efficiency and automation are becoming higher and higher. At the same time, equipment is becoming more complex, and the relationships between various parts are becoming increasingly close. Often, a small fault in a certain area triggers a chain reaction, causing catastrophic damage to the entire equipment and even the environment related to the equipment. This not only causes huge economic losses, but also endangers personal safety, with extremely serious consequences. Therefore, it is extremely important to adopt equipment fault vibration analysis technology to ensure the reliable and effective operation of the equipment.
As an important tool for monitoring and diagnosing faults in rotating machinery, vibration analyzers have been widely promoted and applied in industrial and mining fields, especially in identifying the cause of faults through vibration spectrum analysis, which has been accepted by most on-site technicians. The vibration analyzer first collects vibration signals through a data collector. Generally, the raw data obtained is in the form of time-domain waveforms, which are intuitive, easy to understand, and have obvious characteristics for certain fault signal waveforms. Therefore, time waveforms can be used for analysis first, such as imbalance, misalignment, and impact, which are most obvious in the time-domain waveform.
Portable vibration meter acceleration electric accelerometer, converts vibration signals into electrical signals, and displays the acceleration, velocity, displacement values or frequency spectrum of vibration through processing and analysis of input signals; Its technical performance meets international standardsISO2954And our national standardsGB/T13824Regarding vibration intensity measuring instruments andGB13823-3Requirements for vibration standards using the sine wave excitation method. Applied to conventional vibration measurement, especially vibration measurement in rotating or reciprocating machinery, it is widely used in fields such as power, petrochemicals, mechanical manufacturing, metallurgy, and vehicles.
Functional features:
● Has three display modes: numerical, spectral, and dedicated
● Powerful storage function: capable of storing100×100Group measurement results（100Each measurement point stores100Group data) and100Spectrum map (one spectrum map stored for each measurement point)
The instrument can display the measured spectrum in real-time
The instrument can draw a bar chart based on the set police boundary line
● Simple fault diagnosis: When the measured value exceeds the alarm value, an alarm is displayed and the instrument automatically enters the spectrum analysis state, indicating that the measured value exceeds the limit
● Connected to a micro printer, capable of printing measurement data and spectrograms
● Connected to a microcomputer, it can form trend analysis charts and analyze measurement data(Cooperate with the upper computer software)
● Display:320×200Dot matrix LCD (withLEDBacklight)
Technical parameters:
|
model
|
TIME7232 portable vibration meter
|
|
|
measuring range
|
TIME7232: High sensitivity probe
Acceleration: 0.1m/s ² to 20m/s ² (peak)
Speed: 0.01cm/s-4cm/s (effective value)
Displacement: 0.001mm to 0.8mm (peak to peak)
TIME7231: Low sensitivity probe
Acceleration: 0.1m/s ² to 392m/s ² (peak)
Speed: 0.01cm/s to 80cm/s (effective value)
Displacement: 0.001mm to 18.1mm (peak to peak)
|
|
|
Frequency range
|
Acceleration: 10Hz-200Hz, 10Hz-500Hz, 10Hz-1KHz, 10Hz-10KHz
Speed: 10Hz~200Hz, 10Hz~500Hz, 10Hz~1KHz
Displacement: 10Hz-200Hz, 10Hz-500Hz
|
|
|
Allowable error
|
±5%
|
|
|
Temperature and humidity range
|
0℃～40℃；≤ 80%RH
|
|
|
power supply
|
Lithium battery (can be used continuously for up to 20 hours without LED backlight)
|
|
|
External dimensions
|
171mm×78.5mm×28mm
|
|
|
Weight
|
230g
|
|
Standard configuration:Host, vibration probe and magnetic suction seat (included), charger, leather case
Optional attachments: RS232Communication cablesTA230Printer, probe components (including probes)
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-