brief introduction

TLBType desulfurizationThe pump is a single-stage single suction centrifugal pump developed by Yamei Pump Industry Group based on the actual needs of domestic desulfurization systems, in accordance withGB/T5656Standard.

TLBType desulfurizationPumps are mainly used in wet processesFGDThe main circulation pump of the absorption tower in the device,The main material is duplex steel2507（SAF2507Equivalent to the German standard1.4410）TheCr30AWait, wait,Suitable materials can be selected according to different desulfurization conditions, and the design structure can be optimized to ensure efficient and economical operation.

Structure andApplication scope

The desulfurization pump head mainly consists of suction cover, pump body, front liner plate, impeller, rear liner plate, pump cover, shaft, shaft sleeve, mechanical seal and other components.

The pump is a rear detachable structure, which allows for the replacement of vulnerable parts without disassembling the pipeline. The import direction is horizontal, and the export direction is vertical upward.

TLBType desulfurizationThe pump is suitable for the following desulfurization process systems:

limestone/Lime gypsum method

Magnesium oxide wet process

Ammonia washing method

The allowable chloride ion content in the slurry is up to60000ppmThe slurryPHValues are allowed within2.5～13between.

*Please confirm the manufacturing process when placing an order.

Model Meaning

Example:TLB 300—250—500 A

TLB—Desulfurization pump

300—Pump inlet diameter（mm）

250—Pump outlet diameter（mm）

500—Nominal diameter of impeller（mm）

A—impeller has been cutted first

Performance parameter table

*The power of the motor used for this pump is similar to that of clean water in terms of medium density and viscosity. When ordering, please consider factors such as medium density, viscosity, and usage environment.*This parameter table may not fully list the pump models and parameters. Please consult for details400-6636-008.