Equipment Overview:

TY8000-AseriesElectronic universal testing machine (servo controlled material testing machine) desktopThis model adopts a single space structure, with the test space located in the lower space,Suitable for test loads ≤ 10kNVarious metal and non-metal materials are tested for their mechanical properties such as tension, compression, bending, shear, tearing, peeling, and puncture. They can also undergo automatic control tests for constant velocity loading, constant velocity deformation, and constant velocity displacement, and have three closed-loop control modes for low cycle load cycling, deformation cycling, and displacement cycling.

Obtain indicators such as elongation, tensile strength, bending modulus, elastic modulus, yield strength, net energy, folding energy, total energy, etc., and conduct tests and provide data according to international standards such as GB, ISO, DIN, ASTM, JIS, DIN, etc.

Driven by servo motors, it has high rigidity, high precision, and high transmission efficiency. The planetary reduction system drives the ball screw and has a guiding light rod to improve the lateral rigidity of the equipment and achieve the experimental loading process. This machine adopts an advanced DSP+MCU fully digital closed-loop control system for control and measurement. The computer is used for dynamic display of the test process and test curves, and data processing is carried out. After the test is completed, the data can be reanalyzed through graphical module processing to achieve secondary editing. Excel data export and printing of test reports are available, and the product performance has reached the international advanced level.

Curve category:

Load VS Displacement and load vs Time and displacement vs Time, stress vs Strain and stress vs Time, deformation vs Time, slope vs Load and slope vs Deformation and modulus vs Load and modulus vs Deformation and load vs Deformation, simultaneous display of multiple images, etc.

Compliant with standards:
1Manufactured according to the standards of GB/T2611 "General Technical Conditions for Testing Machines" and GB/T 16491-2008 "Electronic Universal Testing Machines";

2According to GB/T12160 "Provisions for extensometers for uniaxial testing" and GB/T16825 "Inspection of tensile testing machines" for calibration and acceptance;

3Applicable standards: Applicable to international standards such as ASTM, DIN, ISO, JIS, BS, etc.

Standard configuration:
1 set of stretching fixtures;

Optional device:
Small deformation (electronic extensometer), large deformation (rotary or fixed), high and low temperature box, bottom cabinet, fixtures or specially designed fixtures and accessories can be selected according to the provided test standards or test samples, and the cost is calculated separately.

Technical parameters: