VIP member
Techne Sand Bath Fluidized Bed, UK
Brief description: Techne sand bath fluidized bed in the UK, IFB-51、IFB-52、IFB-101、IFB-111、IFB-201。
Product details
Techne Sand Bath Fluidized Bed, UK
（IFB-51、IFB-52、IFB-101、IFB-111、IFB-201)
Product Introduction:
Techne Industrial Sand Bath Fluidized Bed (IFB-51, IFB-52, IFB-101, IFB-111, IFB-201) is a safe, efficient, and low consumption method for effectively cleaning polymers on systems and components (such as molds, breakers, nozzles, tools, connectors, nozzles, screws, valves, etc.), including plastics, paints, epoxy resins, rubber, adhesives, and other hydrocarbon products (such as oils, liquids, greases, lubricants, and coatings)
Immersed in the Techne sand bath fluidized bed (up to 600 ℃) aluminum oxide environment, it immediately begins to degrade and carbonize, and after flowing out, it degrades as carbon dioxide. This instantaneous heating minimizes quenching time and, as a uniform and constant temperature hot bath, greatly reduces the results of metal fatigue and tool damage. Techne sand bath is compatible with injecting compressed air and inert gases (such as nitrogen or argon) for fluidization. The conventional time range is from 30 minutes to 2 hours, depending on the bath load, temperature, and amount of cleaning material
Application:High performance heat treatment, testing and calibration reaction analysis, tempering, annealing, nitriding, distillation curing exothermic and endothermic reactions, thermal analysis equipment, components and materials.
Basic configuration of IFB:Lid/cyclone/fan, sufficient to eliminate non foul odors and smoke; If users burn PVC or other halogenated polymers, or are prone to producing excessive smoke and odor, particulate matter, and volatile organic compounds, they need to purchase filtration systems and cleaning systems
Product features:
1. Quick cleaning, * minimizing expensive production equipment downtime, only requiring 1/3 of the oven time;
2. No tool damage, wire brushing, or scraping damage;
3. Unmanned cleaning reduces labor costs;
4. Will not corrode abrasive molds;
5. Easily handle small holes in circuit breakers, molds, nozzles, and other mold materials;
6. Ideal energy efficiency for sand bath fluidization (IFB-52 operating at 25 kWh);
7. No consumables, solvents, or any other harmful chemicals are required;
8. Remove almost all plastics, such as PVC, PET, Flouropolymers, and PEEK polymers;
9.Techne Sand Bath Fluidized Bed, UKCan be applied to manufacture cardiovascular stents.
Basic configuration:
1. Top cover, cyclone, fan (to eliminate non odor and smoke);
If users burn PVC or other halogenated polymers, or are prone to producing excessive smoke and odor, particulate matter, and volatile organic compounds, they need to purchase filtration systems and cleaning systems.
Technical parameters:
model |
IFB-51 |
IFB-52 |
IFB-101 |
IFB-111 |
IFB-201 |
|
temperature range |
50-600 degrees |
|||||
Temperature balance |
± 1.0 degree |
± 5.0 degrees |
||||
Temperature control type |
3 term PID |
|||||
temperature probe |
K type thermocouple |
|||||
Working diameter cm |
24.13 |
24.13 |
45.72 |
—— |
—— |
|
|
Working Size Diameter x Depth, cm |
25.9× 30.5 |
25.9×66 |
31×35 |
31×100 |
Length, width, and depth 50×22× 39.5 |
|
Heat to 450 degrees Celsius |
105 minutes |
210 minutes |
100 minutes |
165 minutes |
180 minutes |
|
Heat to 600 degrees |
195 minutes |
240 minutes |
210 minutes |
270 minutes |
350 minutes |
|
intake pressure |
0.2Mpa |
|||||
|
Airflow velocity (liters/minute) |
40 |
160 |
120 |
220 |
||
|
Dimensions (Length, Width, Height cm) |
69×61 ×54 |
104×61 ×54 |
92×80 ×63 |
168×102 ×79 |
93×116 ×66 |
|
voltage |
230V, single-phase |
480V, 3-phase |
||||
Power (KW) |
4 |
6 |
6 |
9 |
9 |
|
Weight (empty bucket, Kg) |
42 |
84 |
75 |
260 |
270 |
|
Weight (including medium KG) |
120 |
200 |
167 |
435 |
390 |
|
model |
SBS-4 |
SBL-2D |
temperature range |
50 to 500 degrees |
50 to 600 degrees |
Temperature balance (at 100 degrees) |
± 0.4 degrees |
± 0.2 degrees |
Heating from 20 degrees to 600 degrees time |
70-90 minutes (depending on changes in ambient temperature) |
|
Heating from 20 degrees to 600 degrees time |
—— |
105 |
Cooling time from 600 degrees Celsius to 200 degrees Celsius (minutes) |
—— |
330 |
intake pressure |
1.03Bar（15psi） |
|
Multiple intake flow rate (liters/minute) |
85 |
57 |
Need aluminum oxide (Kg) |
9 |
32 |
Internal cavity size (diameter x depth, cm) |
17.8×14 |
22.8×35 |
External dimensions (outer diameter x height, cm) |
34×47 |
39×70 |
power supply |
240V,6.2A |
240V，17A |
Power consumption (KW) |
1.5 |
4 |
weight |
24Kg |
49Kg |
to configure:
Item number |
UK Techne IFB-51, IFB-52 Sand Bath Fluidized Bed Configuration |
IFB-51 |
Including: temperature controller, aluminum oxide, flow meter |
IFB-52 |
Including: temperature controller, aluminum oxide, flow meter |
F6156 |
Cover of IFB-51/52 |
FA624 |
The net basket of IFB-51 |
FA625 |
IFB-51's deep net basket requires 6036157 |
7031658 |
The net basket of IFB-52 |
7031659 |
IFB-52's deep net basket requires 6036157 |
F6157 |
IFB-51/52 Extra Collar |
F5915 |
Filter (oil removal, dehumidification)+pressure controller |
Item number |
Techne IFB-101 Sand Bath Fluidized Bed Configuration in the UK |
IFB-101 |
Includes: thermostat, exhaust hood, aluminum oxide |
IFB-101 |
Includes: thermostat, exhaust hood, aluminum oxide, automatic flow controller |
F5967 |
cover |
F5976 |
Net basket |
F5243 |
External exhaust fan |
F6110 |
Switch, 150/100mm |
Item number |
Techne IFB-111 Sand Bath Fluidized Bed Configuration in the UK |
IFB-111 |
Includes: thermostat, exhaust hood, aluminum oxide |
IFB-111 |
Includes: thermostat, exhaust hood, aluminum oxide, automatic flow controller |
F7998 |
cover |
F6224 |
Net basket |
F5243 |
External exhaust fan |
F6110 |
Switch, 150/100mm |
Item number |
Techne IFB-201 Sand Bath Fluidized Bed Configuration in the UK |
IFB-201 |
Includes: thermostat, exhaust hood, cover, aluminum oxide |
FB201 |
Net basket |
F5243 |
External exhaust fan |
Item number |
External emission accessories |
SR-100 |
SCRUBBER FSSR1 pipeline cleaner, used to remove 95% HCl from exhaust gas, 480V, 3ph |
AB-100 |
AFTERBURNER FSAB1 emission burner, eliminates black smoke emissions, 240V, 1ph |
CN-100 |
CYCLONE alumina recovery device, reusable to reduce losses |
F0885 |
Aluminum oxide, 25Kg |
F0885A |
Aluminum oxide, 50Kg |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-