The difference between medium voltage ultraviolet disinfection lamp tube and low voltage-Fornitore globale

4-16, Building 5, Baimenqian Industrial Zone, No. 215 Busha Road, Buji Street Office, Longgang District, Shenzhen City, Guangdong Province

1、 Characteristics of Medium Voltage (MP) Ultraviolet Disinfection Lamp:

1. Single lamp high power (400w-10000w/single)

2. Energy efficiency

3. Smaller and more compact size (length not exceeding 700mm)

4. Reduce the number of UV lamps and reactor volume (969 tons/hour flow rate, only 4 lamps, ultra small volume)

5. Wide wavelength, effective irradiation range of 200-400nm (can effectively remove bacteria, viruses, chloramines, chlorides, and trichloroamines).

6. UV biological effects

2、 There are some important differences between medium pressure (MP) ultraviolet disinfection lamps and the more well-known low-pressure (LP) ultraviolet disinfection lamps, which are the main reasons for choosing a medium pressure ultraviolet system:

1. Some applications may require the use of medium voltage UV lamps because they emit a wider range of wavelengths. These applications include:

In public swimming pools, only by emitting ultraviolet light with a wavelength of 200-400nm can the smell of chloramine (bound chlorine) and chlorine be effectively eliminated.

2. The other two important reasons for using medium voltage ultraviolet lamp technology are:

2.1 In order to reduce installation footprint, high-power medium voltage lamps have greatly reduced the size of UV reactors.

2.2. Due to the higher power of a single medium voltage ultraviolet lamp, the number of UV lamps used is greatly reduced.

2.3. Medium pressure ultraviolet lamps can withstand higher pressures and have a wider temperature resistance range, making them suitable for higher pressures and stricter usage environments (BEST UV can withstand pressures up to 16 kilograms and can withstand temperatures up to 100 degrees Celsius).

Introduction to Low Voltage (LP) Lights: IIILow pressure (LP) ultraviolet disinfection lampcharacteristic

Low pressure (LP) ultraviolet disinfection lampSome important differences compared to medium voltage (MP) ultraviolet disinfection lamps:

1. The power of a single lamp is relatively low (the power of a single lamp is less than 320w)

2. Sterilization efficiency, compared to medium voltage lamps, the sterilization time is longer (low voltage zero to a few seconds, medium voltage less than one second)

3. Low pressure (LP) ultraviolet lamps become longer in size as the wattage increases

4. The need for a larger capacity ultraviolet reactor requires setting the length of the reactor based on the number and length of the lamp tubes. Therefore, a slightly higher power low-voltage ultraviolet system takes up more space.

5. Low voltage ultraviolet lamps can only emit a wavelength of 254nm.

4、 Some usesLow pressure (LP) ultraviolet disinfection lampThe application areas are mainly due to:

1. Low processing capacity and low power requirements, especially in the field of water purification.

2. Frequent opening and closing operations are required,Medium pressure ultraviolet sterilizerUsually managed by the central controller, there is delay protection for opening and closing. Therefore, frequent opening and closing are not possible.

3. Low voltage ultraviolet lamps have high conversion efficiency, with up to 40% of the power converted into sterilization energy. Moreover, the 254 nanometer wavelength has stronger targeted disinfection effects on bacteria and viruses.