KHC-200/ETC-200 sludge sampler (also known as sediment sampler)

1： Brief Introduction

The KHC-200 sludge sampler is a manual sampling tool used to collect sludge from rivers and chemical wastewater tanks. It is mainly used in environmental protection, health and epidemic prevention, tap water, chemical and other units. Used for collecting sludge in areas where it is difficult to manually collect sludge, such as deep or distant areas.

2： Main components

The KHC-200 sludge sampler is a manual and grab type equipment produced by our company for collecting sludge from rivers.

It mainly consists of two parts: a sampling grab and a pulling rope.

The sampling grab bucket is made of high-quality alloy materials and consists of a grab bucket and a mechanical transmission actuator, all of which are manufactured in a telescopic type.

(1) Single sampling sludge volume: 1-5 liters

(2) Sampling depth: 20 meters (extra long ropes can be used to increase the sampling depth in special circumstances)

Product features:
1. The product is made of high-quality steel and has a hardened surface, providing strong corrosion resistance.
2. The surface of the product is smooth and shiny.

3： Usage method

(1) When working in the field, first fasten the sampling grab and pull rope.

(2) Open the sampling bucket and place a rod into a hook while opening it, so that the sampling bucket will not be tightly closed.

(3) Slowly place the sampling grab into the river by pulling the rope. When the sludge sampler reaches the bottom of the river, the rope, support rod, and hook will automatically release under the action of the spring.

(4) Pull the sampling grab forcefully, and the sampling grab will automatically close. At the same time, the riverbed sludge will be collected into the sampling grab.

Special requirements can be customized! Please directly: