Dissoprep X8 / X15Solvent preparation workstation
Dissoprep X8/X15 is a primitive, compact, and easy-to-use solvent preparation system. This system integrates filtration, mixing, heating, degassing, and distribution, fully complying with the specifications of USP, EP, FDA, GLP/GMP for solute preparation in dissolution tests.

Dissoprep X8 / X15Solvent preparation workstationadvantage

• Efficient: Save time and money costs
• Good repeatability: the result of automated solvent preparation
• Specification: Compliant withCFR 21 part 11Requirements for electronic signature, audit trail, permission management, etc，conform toUSP，EP，FDA，GLP/GMPThe requirements for solvents in the regulations
• Safety: greatly reduces harm to experimental personnel
• Easy to operate and space saving
• One click automatic calibration function
• Simplification of administrative documents

function

• filter---Easy to replace filter element, automatically check filtration capacity, regularly remind users to replace consumables, and in principle, the filtered solvent can prevent bacterial growth.
• mix---Provide a second inlet for concentrated hydrochloric acid, buffer salts, and surfactants to improve accuracy; High mixing accuracy, deviation<0.2%Install a mixer to ensure uniform solvent concentration.
• heating---Preheat the solvent before degassing to improve the degassing effect; And it can greatly save the heating time of the solvent in the dissolution apparatus.
• degassing---The combination of heating, mixing, and degassing greatly improves the efficiency of solvent degassing (the oxygen content in the final water is only3-5ppm）
• allocation---Free setting of allocation volume, short allocation time, and control of allocation volume accuracy within1%following.
• record---Realize full process recording and printing of solvent preparation process, facilitating auditing and traceability.

Dissoprep X8 / X15Solvent preparation workstationDegassing effect

• As the vacuum degree decreases to300mbarBelow, the temperature rises to32℃Above that, an effective degassing result will be obtained (dissolved oxygen O2 content<5ppm）It is a true form of degassing.
• In the conventional configuration of the instrument (vacuum degree<100mbarThe temperature is32℃~37℃Between, degassing time120Fast and efficient degassing effect can be achieved in seconds