BCM-1600Type biological purification workbenchinstructions

Three person biological purification workbenchProduct Features

1Full circulation airflow design, when there is a large amount of fresh air supply in the work area, the exhaust outlet is turned on.

2The workbench is equipped with up and down movable doors in front and behind, providing flexible and convenient positioning.

3Air curtain isolation design to prevent internal and external cross contamination.

4The adjustable air volume fan system is adopted, and the electrical appliances are controlled by LCD switches to ensure that the air speed in the working area is always in the ideal state.

Three person biological purification workbenchtechnical parameter

structure characteristics

The purification workbench consists of several major components such as a box, fan, high-efficiency filter, and operation switch. The box body is made of cold plates and other materials, with a surface spray treatment. The workbench is made of stainless steel. The purification unit adopts a fan system with adjustable air volume. By adjusting the working state of the fan, the average wind speed in the clean working area can be maintained within the rated range, and the service life of the high-efficiency filter can be effectively extended.

working principle

The air passes through the primary filter, is pressed into the static pressure box by the centrifugal fan, and then filtered by the high-efficiency filter before being blown out from the air outlet to form a clean airflow. The clean airflow flows through the area that needs to be purified at a uniform cross-sectional wind speed, carrying away the dust in the area and creating a high cleanliness working environment.

Installation and use

The workstation should be located in a relatively clean working environment (preferably in a primary purification room of 100000 or 300000 levels), plugged in the power, and turned on according to the functions shown on the control panel. Before starting up, the working area and shell of the purification workstation should be thoroughly cleaned to remove surface dust. Normal operation and use can be carried out within ten minutes after starting up.

maintain

1According to actual usage, regularly remove and clean the primary filter, and the cleaning cycle is generally3-6A month. If not cleaned for a long time, dust accumulation will affect the insufficient air intake and reduce the cleaning effect

2When the ideal cross-sectional wind speed cannot be achieved after normal replacement or cleaning of the primary filter air filter, the operating voltage of the fan should be adjusted to achieve the ideal uniform wind speed.

3Generally, when the operating voltage of the fan is adjusted to the highest point after 18 days of use and the ideal wind speed cannot be achieved, it indicates that the high-efficiency filter has accumulated too much dust (the filter holes on the filter material are basically blocked and need to be updated in a timely manner). The service life of a high-efficiency air filter is generally 18 months.

4When replacing the high-efficiency air filter, attention should be paid to the correctness of the model, specifications, and dimensions (as configured by the original manufacturer), install the device according to the direction of the arrow, and pay attention to the sealing around the filter to ensure that there is absolutely no leakage.

General faultsReasons and elimination methods