VIP member
Product details
Product Introduction
The XQ toothed rake grille is an important front-end interception device in sewage treatment. Suitable for water supply and drainage pump stations, urban sewage, industrial wastewater, etc., it can be used as both coarse and fine grids.
-
Model representation
-
Structure and working principle
Tooth rake grilleThe rake teeth made of nylon or stainless steel are assembled in a certain order on the chain shaft to form a closed circular rake chain. The entire rake chain moves continuously from bottom to top under the drive of the transmission sprocket, transporting suspended solids trapped on the rake teeth from sewage to the ground or above the platform, and removing materials during the rotation and meshing of the rake teeth, in order to protect the water pump and reduce the processing load of subsequent processes.
-
Mounting Dimension
Product advantages
1. Overall movement of the grid surface.
2. Equipped with overload protection device, reliable operation.
3. The whole machine is easy to supply and install.
Specification and model
Ordering Instructions
Reasonably select according to the technical parameter table and process requirements, indicating the model specifications and slag outlet height. If not specified, the slag outlet height should be 750mm
Not specifying the brand of reducer and equipment material requirements, indicating that the reducer is made of domestic conventional reducer and the equipment material is made of all stainless steel 304 material.
The required embedded plates and supporting slag conveying and storage equipment need to be ordered separately, and the installation of the embedded plate structure must be requested from our technical personnel.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-