model:

TD-4100XDC online water oil analyzer (E09 version);

Operating principle:

UV fluorescence method;

Application areas:

Steam condensate, boiler feedwater, general clean water, cooling water, source water protection, etc; Or wastewater that has undergone preliminary treatment;

Applicable to:

Fuel, crude oil, other fuels and lubricants, phenol, styrene, most thermal fluids, aromatic compounds, benzene derivatives, etc;

Detection range:

Steam condensate water (fuel, crude oil) 5ppb-500ppm;

Detection lower limit:

Most other hydrocarbons are less than 50ppb;

Stability:

± 1%, (drift<± 10% within 6 months);

Response time:

Read continuously every second, with a 3-second full-scale peak change;

Calibration method:

Blank/standard solution calibration, or third-party external method correlation calibration;

On site verification:

Prepare petroleum standard solutions through factory equipped ultraviolet fluorescent agents or on-site preparation;

Size:

Wall mounted: 1118mm in length, 318mm in width, and 635mm in height; Pry mounted: length 653mm x width 653mm x height 1737mm;

Weight:

78.5kg (173 pounds);

Local display:

Equipped with local LCD display, optional units include PPM, PPB, or raw fluorescence intensity;

Control:

External 316SS stainless steel touch keyboard;

Power requirements:

90-240VAC, 2.2A (24VDC optional);

Pipeline size:

Inlet pipe: 3/8 "or 1/2" pipe, return pipe: 3/8 "or 1/2" pipe;

Sample pressure:

＜ 1724kPag (250PSI), (customizable high compressive strength);

Sample temperature:

60 ℃, 140 ° F (customizable high temperature, 100 ℃ or higher);

Instrument air supply:

General area usage: 0.28-0.57 cubic meters per hour (10-20 SCFH standard cubic feet per hour);

Explosion proof Zone I and Zone II: 0.62 cubic meters per hour (22SCFH standard cubic feet per hour);

Operating temperature:

0~49 ℃, 32~121 ° F (optional heater or vortex cooler)

Characteristics of flow pool:

Closed flow pool with internal condition monitoring function for flow pool;

Sample reflux:

Acceptable reflux of pressurized samples;

Reagent:

Solvent-free type;

Alert:

4 types: early warning/high level warning/pool volume and pool condition warning/cleaning prompt warning;

Alarm relay:

Dry contacts. DC 5-100VDC, 500-100mA and AC 130VAC, 50/60Hz, up to 76mA (high current AC and DC relays are optional);

Signal output:

4-20mA, external power supply, 50 ohm impedance;

Communication protocol:

HART and Modbus are optional;

diagnosis:

Self diagnosis, connection of internal faults and alarms, monitoring of flow pool conditions;

Safety:

Password protection software with a lockable 316 stainless steel casing;

IP rating:

IP56, NEMA 4X (standard); IP66 optional (ATEX Zone I and NFPA Class 1, Division 1);

Maintenance and upkeep:

On site calibration inspection and flow pool cleaning;

Cleaning solution:

Organic cleaning agents;

Explosion proof accessories:

Suitable for ATEX Zone I, ATEX Zone II, and NFPA Class 1, Division 1， And NFPA Class 1, Division 2；

Sample pump:

Optional;

Cleaning system:

Semi automatic cleaning system (optional);

data logger:

Optional.

ISO certification:

ISO 9001： 2008 Quality and Physical Fitness Certification.

E09 configuration package:

Newly upgraded E09 configuration package (dual monitoring points/dual channel switching, remote computer software control).