The simple connection device can use commercially available connectors to achieve quick connection, which is very convenient
|
![]() |
![]() |
※1 | EMC Designated Applicable |
---|---|
※2 | Recognition certification |
characteristic
Built in connector, compact and small
Compared to previous products, it greatly saves space. |
![]() |
According to the installation conditions, there are 6 specifications to choose from
Not only NPN output type, but also PNP output type has been launched. |
![]() |
Can use commercially available connectors
The connector connection type eliminates all the troubles of previous soldering, insulation treatment, etc. In addition, the connector adopts the universal (commercially available) digital pressure sensor DP-100 series. |
![]() |
Notification of Recommended Splicing Connectors
Japan Crimp Terminal Manufacturing Co., Ltd. produces contacts: SPHD-001T-P0.5
Shell: PAP-04V-S
Attention: For detailed information on recommended products, please consult the manufacturer.
Our company can also correspond to small sets. For details, please refer to the available options
Improve maintainability and construction efficiency, significantly reduce total costs
|
type
type | shape (mm) |
detection distance |
model | output | output action | |
---|---|---|---|---|---|---|
small type ・ link connect implement within place type |
K-type |
![]() |
5mm (fixed) | PM-K64 | NPN open collector transistor | ON/When entering the light ON when blocking light Equipment 2 clock output |
PM-K64P | PNP open collector transistor | |||||
t type |
![]() |
PM-T64 | NPN open collector transistor | |||
PM-T64P | PNP open collector transistor | |||||
![]() |
PM-T64W (Note 1) |
NPN open collector transistor | ||||
L-type |
![]() |
PM-L64 | NPN open collector transistor | |||
PM-L64P | PNP open collector transistor | |||||
y type |
![]() |
PM-Y64 | NPN open collector transistor | |||
PM-Y64P | PNP open collector transistor | |||||
f type |
![]() |
PM-F64 | NPN open collector transistor | |||
PM-F64P | PNP open collector transistor | |||||
R-type |
![]() |
PM-R64 | NPN open collector transistor | |||
PM-R64P | PNP open collector transistor |
(Note 1): | : PM-T64W is a type that can be installed interchangeably with our company's previous product [PM-T53 (B)]. |
---|
specifications
type | Small connector built-in type | ||||||
K-type | L-type | f type | R-type | t type | y type | ||
model | NPN output | PM-K64 | PM-L64 | PM-F64 | PM-R64 | PM-T64(W) | PM-Y64 |
PNP output | PM-K64P | PM-L64P | PM-F64P | PM-R64P | PM-T64P | PM-Y64P | |
detection distance | 5mm (fixed) | ||||||
Minimum detectable object | 0.8 × 1.8mm non transparent body | ||||||
Ying Cha | Below 0.05mm (Note 2) | ||||||
repeatability | Below 0.01mm (Note 3) | ||||||
supply voltage | 5-24V DC ± 10% pulsation P-P10% or less | ||||||
Consumption current | Below 15mA | ||||||
output |
NPN open collector transistor Maximum incoming current: 50mA External voltage: below 30V DC (between output and 0V) Remaining voltage: below 0.7V (when the incoming current is 50mA) Below 0.4V (when the incoming current is 16mA) PNP open collector transistor Maximum source current: 50mA External voltage: below 30V DC (between output and+V) Remaining voltage: below 0.7V (when the source current is 50mA) Below 0.4V (when the source current is 16mA) |
||||||
output action | Equipped with two types of outputs: ON when entering light and ON when blocking light | ||||||
reaction time | When illuminated: below 20 μ s, when blocked: below 100 μ s (Reaction frequency above 1kHz) (Note 4) |
||||||
Work status indicator light | Orange LED (lights up when illuminated) | ||||||
ring area sexually ability |
Environmental temperature for use | -25~+55 ℃ (note not to condense or freeze), during storage:- 30~+80℃ | |||||
Environmental humidity for use | 35-85% RH, during storage: 5-95% RH (Note 5) | ||||||
Use environmental illumination | Fluorescent light: Light receiving surface illumination below 1000lx | ||||||
withstanding voltage | AC1000V 1 minute between all power connection terminals and the casing | ||||||
insulation resistance | Between all power connection terminals and the casing, with a resistance of 50M Ω or higher, based on a DC250V high impedance meter | ||||||
Vibration | Frequency range of 10-2000Hz, double amplitude of 1.5mm, X, Y, and Z directions for 2 hours each | ||||||
Impact resistance | Acceleration 15000m/s2(Approximately 1500G) 3 times each in the X, Y, and Z directions | ||||||
Projection element | Infrared LED (peak wavelength of 940nm, non modulated) | ||||||
material | Shell: PBT、 Narrow slit transparent cover: polycarbonate | ||||||
Cable extension | 0.3mm2The total length of the above cables can be wired up to 100m (Note 6) | ||||||
weight | Body weight: approximately 3g |
(Note 1): When not specified, the measurement condition is an ambient temperature of+23 ℃.
(Note 2): Refers to the numerical value when the detected object is moved along the horizontal direction of the H-shape.
(Note 3): Refers to the value obtained when the detection object is moved along the horizontal direction of the H-shape and the insertion amount of the detection plate is 5mm.
(Note 4): The reaction frequency refers to the numerical value when the disk in the figure rotates.
|
dimension
- unit mm
PM-K64(P)
|
PM-T64(P)
|
PM-T64W
|
PM-L64(P)
|
PM-Y64(P)
|
PM-F64(P)
|
PM-R64(P)
|
CN-14A-C□
CN-14A-R-C□
|
purpose
|
|
|
option
Product Name | model | content | |
---|---|---|---|
Cable with connector | CN-14A-C1 | Length 1m | 0.2mm24-core rubber cable with connector on one end. Cable outer diameter: φ3.7mm |
CN-14A-C2 | Length 2m | ||
CN-14A-C3 | Length 3m | ||
CN-14A-C5 | Length 5m | ||
Cable with connector (Bending resistant type) |
CN-14A-R-C1 | Length 1m | 0.2mm24-core rubber cable with connector on one end. Cable outer diameter: φ3.7mm |
CN-14A-R-C2 | Length 2m | ||
CN-14A-R-C3 | Length 3m | ||
CN-14A-R-C5 | Length 5m | ||
connector | CN-14A | 10 shells, 40 contacts for 1 set |
|
|