Ultra small and space saving!!
|
![]() |
![]() |
![]() |
※1 | EMC Designated Applicable |
---|---|
※2 | Recognition certification |
※3 | Certification obtained (only for some models) |
characteristic
The equipment has two independent outputs
All models are equipped with two independent outputs - ON for incoming light and ON for shading, which can meet different output requirements depending on the usage location. |
![]() Attention: For unused output lines, please make sure to perform insulation treatment. |
Save construction and quickly crimp connectors
A wide range of connector products with convenient maintenance are available. |
![]() |
Multiple models to choose from
There are 12 shapes and 24 models available.
You can choose the model that meets your installation requirements.
Global applicability
Compliant with European EMC specifications. And obtained UL certification.
The cable type (excluding 3m cable length type) and NPN output type have also been certified with the Korean S mark.
PNP output type is also available. Can be used with confidence on export machines.
type
PM-44 (cable type)
type | shape (mm) |
detection distance |
Type name (Note 1) | output | output action |
---|---|---|---|---|---|
K-type |
![]() |
5mm (fixed) | PM-K44 | NPN open collector transistor |
Equipment with 2 outputs ON/When entering the light ON when blocking light |
PM-K44-C3 | |||||
PM-K44P | PNP open collector transistor |
||||
PM-K44P-C3 | |||||
t type |
![]() |
PM-T44 | NPN open collector transistor |
||
PM-T44-C3 | |||||
PM-T44P | PNP open collector transistor |
||||
PM-T44P-C3 | |||||
L-type |
![]() |
PM-L44 | NPN open collector transistor |
||
PM-L44-C3 | |||||
PM-L44P | PNP open collector transistor |
||||
PM-L44P-C3 | |||||
y type |
![]() |
PM-Y44 | NPN open collector transistor |
||
PM-Y44-C3 | |||||
PM-Y44P | PNP open collector transistor |
||||
PM-Y44P-C3 | |||||
f type |
![]() |
PM-F44 | NPN open collector transistor |
||
PM-F44-C3 | |||||
PM-F44P | PNP open collector transistor |
||||
PM-F44P-C3 | |||||
R-type |
![]() |
PM-R44 | NPN open collector transistor |
||
PM-R44-C3 | |||||
PM-R44P | PNP open collector transistor |
||||
PM-R44P-C3 |
(Note 1): | The cable length for models with the '- C3' symbol at the end of the model is 3m. |
---|
PM-54 (connector type)
type | shape (mm) |
detection distance |
Type name | output | output action |
---|---|---|---|---|---|
K-type |
![]() |
5mm (fixed) | PM-K54 | NPN open collector transistor |
Equipment with 2 outputs ON/When entering the light ON when blocking light |
PM-K54P | PNP open collector transistor |
||||
t type |
![]() |
PM-T54 | NPN open collector transistor |
||
PM-T54P | PNP open collector transistor |
||||
L-type |
![]() |
PM-L54 | NPN open collector transistor |
||
PM-L54P | PNP open collector transistor |
||||
y type |
![]() |
PM-Y54 | NPN open collector transistor |
||
PM-Y54P | PNP open collector transistor |
||||
f type |
![]() |
PM-F54 | NPN open collector transistor |
||
PM-F54P | PNP open collector transistor |
||||
R-type |
![]() |
PM-R54 | NPN open collector transistor |
||
PM-R54P | PNP open collector transistor |
specifications
type | subminiature | ||
---|---|---|---|
Cable type | connector type | ||
Type name | NPN output | PM-□44 | PM-□54 |
PNP output | PM-□44P | PM-□54P | |
detection distance | 5mm (fixed) | ||
Minimum detectable object | 0.8 × 1.8mm non transparent body | ||
Ying Cha | Below 0.05mm | ||
repeatability | Below 0.03mm | ||
supply voltage | 5-24V DC ± 10% pulsation P-P10% or less | ||
Consumption current | Below 15mA | ||
output |
Maximum incoming current: 50mA External voltage: below 30V DC (between output and 0V) Remaining voltage: below 0.7V (when the incoming current is 50mA) Below 0.4V (when the incoming current is 16mA) Maximum source current: 50mA External voltage: below 30V DC (between output and+V) Remaining voltage: below 0.7V (when the source current is 50mA) Below 0.4V (when the source current is 16mA) |
||
output action | Equipped with two types of outputs: ON when entering light and ON when blocking light | ||
reaction time | When illuminated: below 20 μ s, when blocked: below 100 μ s (reaction frequency above 1kHz) (Note 2) | ||
Work status indicator light | Red LED (lights up when illuminated) | ||
ring area sexually ability |
Environmental temperature for use (Note 3) (Note 4) | -25~+55 ℃ (note not to condense or freeze), during storage:- 30~+80℃ | |
Environmental humidity for use | 35-85% RH, during storage: 35-85% RH | ||
Use environmental illumination | Fluorescent light: Light receiving surface illumination below 1000 lx | ||
withstanding voltage | AC1000V 1 minute between all power connection terminals and the casing | ||
insulation resistance | Between all power connection terminals and the casing, with a resistance of 50M Ω or higher, based on a DC250V high impedance meter | ||
Vibration | Frequency range of 10-2000Hz, double amplitude of 1.5mm, X, Y, and Z directions for 2 hours each | ||
Impact resistance | Acceleration 15000m/s2(Approximately 1500G) 3 times each in the X, Y, and Z directions | ||
Projection element | Infrared LED (peak wavelength of 940nm, non modulated) | ||
material | Shell: PBT、 Narrow slit transparent cover: polycarbonate | ||
cable | 0.09mm24-core rubber cable [PM-□24-R:0.1mm24-core bending resistant, oil resistant, and heat-resistant rubber cable (Note 5) 1m in length |
- | |
Cable extension | 0.3mm2The total length of the above cables can be extended to 100m | ||
weight | Body weight: approximately 15g | Body weight: approximately 3g |
(Note 1): When not specified, the measurement condition is an ambient temperature of+23 ℃.
(Note 2): The reaction frequency refers to the numerical value when the disk in the figure rotates.
|
|
dimension
- unit mm
PM-K44
PM-K44P
|
PM-T44
PM-T44P
|
PM-L44
PM-L44P
|
PM-Y44
PM-Y44P
|
PM-F44
PM-F44P
|
PM-R44
PM-R44P
|
PM-K54
PM-K54P
|
PM-T54
PM-T54P
|
PM-L54
PM-L54P
|
PM-Y54
PM-Y54P
|
PM-F54
PM-F54P
|
PM-R54
PM-R54P
|
Terminal section (PM - □ 54, PM - □ 54P)
|
CN-14
Connector (sold separately)
|
CN-14H
CN-14H-2
Crimp connector (sold separately)
|
CN-14H-C1
CN-14H-C3
Comes with cable connectors (sold separately)
|
purpose
|
option
Product Name | Type name | content | |
---|---|---|---|
connector | CN-14 | Welding type connector | |
Pressure connector | CN-14H | Can quickly crimp 0.08-0.2mm2Cable connectors. Wire diameter: φ0.7~φ1.2mm |
|
CN-14H-2 | A connector that can quickly crimp cables with thicker shells than usual and meets UL standards. Conductor cross-sectional area 0.18-0.22mm2use Wire diameter: φ1.2~φ1.52mm |
||
With cable connector |
CN-14H-C1 | 1m in length The weight of the body is about 20g |
Used with connector type 0.18mm24-core rubber cable Cable outer diameter: φ3.8mm |
CN-14H-C3 | 3m in length The weight of the body is about 65g |
||
Crimping pliers | CN-HP | Special crimping pliers for crimping connectors CN-14H and CN-14H-2. |
|
|
|
|||||||||
|