VIP member
Ultrasonic flaw detector - PC based flaw detector
The USLT 2000 series is a PC based ultrasonic dialogue instrument with outstanding ultrasonic function and 2 gate circuits, with a wide frequency rang
Product details
USLT series
The USLT 2000 series is a PC based ultrasonic dialogue instrument with outstanding ultrasonic function and 2 gate circuits, with a wide frequency range (0.5-20 MHz). The PC monitor has a quasi analog A-scan with a resolution of up to 635x400 pixels and a high refresh rate. The instrument settings, test results, or complete test orders are stored in the database. The USLT 2000 series ultrasonic flaw detector is widely used for spot welding detection in the entire automotive industry.
- PC based flaw detector
- Standard USB interface for devices based on industrial desktop or laptop computers.
- Spot welding detection function with optional spot welding detection software UltraL OG
- Extended software module for precise thickness measurement, depth measurement, and FFT segmentation
Spot welding inspection in the automotive industry.
Ultrasonic flaw detector - PC based flaw detector Ultrasonic flaw detector - PC based flaw detector
| Calibration range | The smallest: 0-2.5 millimeters; 0-0.1 inches (steel) maximum size: 0-9700 millimeters; 0-381 inches (steel) |
|---|---|
| Sound speed range | 500-15000 meters per second; 0.02-0.59 inches/millisecond, integrated, editable material list |
| Pulse offset | -10-1500 millimeters- 0.39-50 inches (steel) |
| Detection delay | 0 - 100 ? s |
| damping | 50 ohms/500 ohms; 1000 ohms |
| strength | 220 pF / 1 nF |
| frequency range | 0.5-20 MHz (-3dB); 4 filter ranges |
| Pulse repetition frequency | 1-1000 Hz, adjustable automatically or manually |
| gain | 110 dB, adjustable at intervals of 0.5/1/2/6 dB |
| Operation mode | Pulse reflection method, twin mode, penetration method |
| detection | Full wave, positive half wave, negative half wave; RF display (up to 150mm/5.9-inch steel) |
| inhibition | 0 to 90% linear |
| DAC/TCG | DAC， With up to 16 curve points (reference reflector), dynamic range of 37 dB, maximum slope of 6 dB/millisecond; 3 adjustable dB distance curves that can be converted to Time Gain Correction (TCG) mode (lateral recording threshold); Compliant with national and international testing standards |
| DGS | Record curves for measuring the size of all equivalent reflectors and probes with DGS functionality; Set as DAC or TCG; Evaluate dB size based on the curve, ERS or evaluation grade (JIS); Sound attenuation and transmission correction; Available reference reflectors: bottom, disc reflector, and side drilled holes |
| sluice gate | Two independent gates, adjustable within the entire maximum calibration range; Evaluation of A-scan based on display refresh rate; Gate alarm: closed, * *, reverse *; Visual and/or audible alarm |
| Distance measurement | Each gate circuit can independently select the mode of the echo wave side or peak. In RF mode, the zero transition initial pulse combined with the increased or decreased echo wave side and the measurement point of the A-gate circuit or B-gate circuit: B-gate circuit - A-gate circuit (differential measurement) |
| Measurement resolution | The maximum sound path/flight time is 12.6 millimeters: 0.01 millimeters; Otherwise, it is 0.2% of the display width |
| amplitude | 0.5% screen height or 0.2dB |
| A-scan digitization | 1024 X 1024 pixels |
| Display frozen | Static A-scan freezing, dynamic A-scan freezing (peak, echo dynamic+real-time signal), frozen through an average of 2 to 32 ultrasound pulse cycles |
| Echo comparison | Synchronize display of currently activated signals and stored A-scans |
| output | Output documents through the standard interface of a laptop computer |
| input | 2 analog inputs, such as probe coordinates, digitized every 10 digits |
| Dialogue language | German, English, French, Spanish, and Italian |
| Company | Millimeters, inches? s |
| probe | Connectable standard and conversation probes (automatic recognition) |
| data storage | The database is used to store and manage instrument settings, test tasks, and test results, including A-scans, DACs, and alphanumeric annotations, exported to Microsoft Excel; Only affected by hard disk size |
| Software | Operating system Windows 2000/XP; Client server interface OLE 2.0; Options: UltraWORKS (design tool), FFT (frequency analysis), EHT (hardening depth), RTM (resonant thickness measurement, resolution of 1?), UltraLOG (Evaluation Scheme for Spot Weld Testing) |
| Laptop version (trademark device) | Standard or Industrial Edition (IP52) |
| Power and battery operation | About 5 hours, depending on the workload of the processor |
| working temperature | 5 ° C to 45 ° C; 41 ° F to 113 ° F (standard) 0 ° C to 50 ° C; 32 ° F to 122 ° F (industrial) |
| Dimensions (height x width x depth) | 63mm x 300mm x 230mm; 2.5 inches x 12 inches x 9 inches (standard) 64 millimeters x 302 millimeters x 273 millimeters; 2.5-inch X11.9 inch X10.7 inch (industrial) |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-