Ultrasonic flowmeter (split type)-Fornitore globale

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone

18852329880
Address

No. 286 Tongtai Avenue, Jinhu Industrial Park

Contact Now

Ultrasonic flowmeter (split type)

1、 Product feature 1: High precision measurement with linearity better than 0.5%

Contact Supplier

More Products

Product details

CHARACTERISTICS

1. High precision measurement

Linearity better than 0.5%, repeatability accuracy better than 0.2%, measurement accuracy better than ± 1%

2. Large measurement range

By selecting different types of sensors, it is possible to measure the flow rate of pipelines with diameters ranging from DN15 to DN6000mm

3. High protection level

The one-time protection level of the meter can reach IP68 by adopting the fully sealed waterproof process, and it can work underwater for 2 meters

4. Easy to operate

Both magnetic rods can be used to browse parameters on the secondary table, and parameters can be reset or displayed in Chinese through the secondary table

5. Multiple Display

The first meter can complete the measurement at the measuring point, and the first meter can cyclically display parameters such as cumulative flow rate, instantaneous flow rate, and flow velocity. The second meter canMore than 100 menus displayed in Chinese

6. Long transmission distance and fast networking

RS-485 bus communication is used between the primary meter and the secondary meter (or computer), using ordinary cables, with a transmission distance of up to 1000 metersUp,Networking is very convenient and fast. This transmission method has strong anti-interference ability and solves the cost of dedicated cables for split type ultrasonic flow metersHighanti-interferenceProblems such as poor capability and short transmission distance.

2、 Measurement composition diagram

3、 Basic technical parameters

term eye	Performance and parameters
host machine	primary texture	Time difference type, using low-voltage multi pulse transmission circuit and dual balanced signal differential reception circuit
	refined linear measure	internet traffic:be better than±l%	repeatability: 0.2%	Measurement period: 500ms
	Backlit LCD can simultaneously display instantaneous flow rate, cumulative flow rate, flow rate, time and other data
	letter name transport go out	Current output:4～20mAperhaps0～20mAWait, impedance0～1K, accuracy0.1%
		OTCOutput: Positive, negative, net flow cumulative pulse signal or frequency signal of instantaneous flow（1～9999HzChoose between options
		Relay: capable of outputting near20Seed source signal (such as no signal, reverse flow, etc.)
		Sound alarm: The buzzer can emit an alarm sound according to the settings (such as excessive or insufficient flow)
	letter name transport enter	Can input three current signals (such as temperature, pressure, liquid level, etc.)
	Before automatic memory64Recently64Month, before5Annual traffic data
	Before automatic memory64The time and data flow of incoming and outgoing calls can be manually or automatically replenished to reduce user data loss
	Before automatic recording64Is the working status of the daily flow meter normal
	Data interface:RS232、RS485
	Programmable batch (quantitative) controller
Special cable	Customized twisted pair cables, generally limited to20riceIn specific occasions, a single piece can be extended to500riceNot recommended; selectRS485Communication, transmission distance can reach over kilometers
pipe road feeling condition	Pipe	Steel, stainless steel, cast iron, cement pipe, copperPVCAll dense pipelines such as aluminum and fiberglass are allowed to have lining
	Inside Diameter	15～6000mm
	Straight pipe section	The installation point of the sensor should ideally meet the requirements:upstream10D, downstream5DMeet the requirements of the giant pump outlet30D(DIt refers to the diameter of the pipe
measure measure be situated between nature	species class	Water, seawater, industrial wastewater, acidic and alkaline liquids, alcohol, beer, various oils, and other single and uniform liquids that can transmit ultrasonic waves
	warm linear measure	standard probe:- 30-90℃High temperature probe:- 30-160℃
	turbid linear measure	10000ppmAnd the bubble content is small
	flow fast	0～±30m/s
	flow direction	Positive and negative bidirectional measurement, and can measure net flow
worker rise ring area	warm linear measure	host:- thirty～80℃
		flow sensor:- forty～160℃ temperature sensor:Select according to customer needs
	wet linear measure	host: 85%RH
		flow sensor:Can be immersed in water for work, water depth≤3m
electricity source	AC220VperhapsDC8～36VperhapsAC7～30V
work consume	less than1.5W	communication protocol	MODBUSagreementMBUSagreementFUJIOther agreements such as protocols

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content