The vacuum cone spiral belt dryer is particularly suitable for process processing in closed and controllable environments, such as the pharmaceutical and chemical industry, additives, extract crystals that are unstable under air or high temperature, and various pharmaceutical and biological processes. The multi-purpose spiral belt vacuum dryer equipment from Taiyangchen Company is the choice to meet your production needs.

2、 High mixing accuracy can achieve high mixing accuracy. Even if materials with different densities and particle shapes are mixed in the same batch of products, the required mixing accuracy can be achieved in a conical mixer. Adding a small amount of material to a large batch of materials under such harsh process conditions can also be mixed in the spiral belt vacuum dryer of Taiyangchen Company.

3、 Low shear force spiral belt mixing
Using a low shear force spiral stirring blade, gently mix materials at low speed and low energy consumption. The intensity and mixing time of the mixture are relatively low.

4、 Suitable for viscous materials
Under the action of friction and pressure generated between material particles during mixing, even highly viscous materials can be separated and effectively mixed.

5、 Different material loading rates
The filling rate of the screw belt vacuum dryer is 30-100 of the effective working volume, and consistent results can be obtained for mixing and drying with different loading amounts within this range.

6、 Sealed cleaning design
The spiral belt vacuum dryer itself is a fully enclosed design, and all connecting components including feeding and discharging are fixed, which can meet the requirements of good materials and environment.

7、 Large caliber ball section discharge valve
Real ball section valve
Powder, liquid, and gas seals
Eccentric shaft structure, frictionless sealing surface
No obstruction, fully open in the diameter direction
Sanitary and GMP compliant design, no dead zones, no residual materials, easy to clean
The standard materials for the structure are SUS316 and SUS304 stainless steel
There are no cast parts in the structure, and there are no porosity or shrinkage defects
Sealed bearing chamber
Standard surface treatment, internal Ra0.4 μ m, external Ra0.8 μ m
Designed for full vacuum and 0.25Mpa pressure
The design allows for the introduction of nitrogen gas, which is beneficial for vacuum drying and eliminating mixing dead corners
Design to allow for the introduction of cleaning solution to clean the interior of the valve body
Design installable filters to prevent dust discharge during discharge