Vibration screen dust removal equipmentIt is a specialized dust purification equipment for handling vibrating screens during operation, which effectively addresses the issue of dust pollution caused by vibrating screens during operation. It is a bag filter, and the vibrating screen dust collector has been widely used in building materials, chemical industry, smelting, mining, and food industry. Dust removal in industries such as machinery is highly trusted by users!

Vibration screen dust removal equipmentPrinciple: The gas containing crushed stone dust enters the dust removal equipment through an air inlet, and first passes through the inclined plate and turns to the ash hopper. At this time, the speed of the airflow slows down. Coarse crushed stone dust will fall into the ash hopper due to inertia and natural settling, while finer dust will enter the filtering chamber with the airflow for filtration and purification. The purified gas is then discharged by a fan.

After the dust removal equipment has been working for a while, the dust cleaning controller will automatically send a dust cleaning signal. During dust cleaning, the lift valve of one chamber will be closed to cut off the filtered airflow of the air source. Then, the pulse valve of this chamber will be opened to blow high-pressure compressed air into the purification chamber. After the pulse valve is opened for 3-5 seconds, the lift valve will reopen. At this time, the chamber enters normal working state, and the dust cleaning of this chamber is completed. After a few seconds, the second chamber began to clear the dust, and the pulse valve resumed the cleaning action of the first chamber. The dust cleaning work is carried out in a room, and the entire process is controlled by a pre-set program. The cleaning time can be adjusted.

Advantages of vibrating screen dust removal equipment: It avoids secondary dust and can replace the bag without stopping the machine, saving time for bag replacement.
It can directly handle dust concentrations up to 500g/m3n and is used for purifying and collecting dust from dust points such as mine screening and workshop screening.

The form of the cover of the vibrating screen dust collector plays an important role in the dust removal efficiency of the dust collector. Huakang Zhongtian Environmental Protection reminds customers to pay attention to the following issues when choosing:
1. Covering the dust generated during the screening process with a hood can simply create a dust collection chamber to create negative pressure inside the hood and prevent dust from overflowing. Alternatively, an open suction hood can be used to control the dust area within a small range, capture and extract the dust containing gas, purify it through a bag filter, and discharge it from the chimney.
2. Sealed devices or dust collection covers should be installed at the feeding and discharging ports of the ore raw material vibrating screen, the upper part of the vibrating screen, and the transfer point of the belt conveyor. Double layered sealed covers should be installed at the receiving point of the transfer point.
3. During the production process of vibrating screens, for dust producing equipment that is concentrated and has similar dust properties and working degrees, a large centralized dust removal system should be used as much as possible to facilitate management.
The requirements for dust removal equipment vary depending on the working conditions of the vibrating screen. Huakang Zhongtian Environmental Protection provides customers with various specifications of vibrating screen dust collectors. We can provide you with a dust removal solution specifically tailored to your vibrating screen working conditions. If you need it, you can call 24 hoursService hotline: 400-6472-988Welcome customers to our company for negotiations and cooperation!