This machine belongs to the hydraulic three roll plate rolling machine imported from Japan, which is used to roll steel plates into cylindrical, conical, circular arc and other shapes.
This machine belongs to the hydraulic three roll plate rolling machine, which is used to roll plates into cylindrical, circular arc, and conical shapes at room temperature. The upper roller can move vertically or horizontally. Pre bending is achieved by horizontally moving the upper roller to an asymmetric position relative to the lower roller. When rolling, the two lower rollers are driven by an electric motor and a reducer. Due to the unchanged elevation of the lower roller, it is convenient for feeding and operation. The tipping frame adopts hydraulic tipping.
The vertical displacement of the upper roller is driven by hydraulic transmission, while the horizontal movement is driven by mechanical transmission. Adopting PLC programmable display control. Provide a detailed electrical schematic diagram, strictly follow the electrical wiring diagram, and ensure that the numbers on both ends of each wire are clear and complete. The wire terminal block should be labeled with the same wire number as the wire, and corresponding markings should be made on the electrical wiring diagram and schematic diagram; All electrical components used in the equipment are high-quality products from well-known enterprises. Electrical protection devices (such as current relays, air switches, etc.) must be strictly tested before installation to ensure reliable operation. The hydraulic components used in the equipment are branded products. The equipment runs smoothly, controls flexibly, has no jamming, oil leakage, and abnormal noise.
Adding a cone device can roll cones within a certain range. The equipment has high reliability and low failure rate.
For more detailed parameters, please consult/strong>

Technical parameters: