Water bath oscillatorApplication areas:

Water bath oscillatoralso known asWater bath constant temperature shaker It is a temperature controllable deviceConstant Temperature Water-bathingandoscillatorThe combined biochemical instrument is mainly suitable for the oscillation cultivation of various liquid and solid compounds such as biology, biochemistry, cells, and bacterial strains in scientific research departments such as universities, medical institutions, petrochemicals, health and epidemic prevention, and environmental monitoring. This instrument uses water as the heating medium and utilizes advanced microcomputer temperature controllers for precise temperature control to achieve the required temperature accuracy for the experiment. During the experimental process, it is often necessary to constantly shake the test solution to prevent precipitation or to compare two or more test solutions at a certain shaking speed and temperature. Using this instrument can achieve ideal results.

Water bath oscillator manufacturer

Water bath oscillatorcharacteristic:

1. Temperature control range: room temperature -100 degrees.

2. Temperature control method: Adopting microcomputer temperature control, precise temperature control, no overheating or overshoot phenomenon.

3. Vibration mode: reciprocating, rotary, dual function (to be selected when ordering)

4. Inner liner material: high-quality stainless steel, universal spring clamp, and different clamps can also be designed according to requirements.

5. Shell material: High quality cold plate surface with electrostatic spraying, rust prevention, and extended service life.

6. Motor type: Permanent magnet DC motor, small size, high power, long service life, and also has the characteristics of low noise.

7. Speed regulation method: stepless speed regulation.

Water bath oscillator manufacturer

Water bath oscillatorBasic parameters:

Water bath oscillatorNotice before use

1. Please read this manual carefully before use.
2. The working surface of the machine should not be excessively smooth (such as tiles, etc.).
3. The electrical rated parameters of the socket provided by the user should not be less than the electrical rated parameters of the machine, and there should be good grounding measures.
4. The whole machine is strictly prohibited from being used in an environment with direct sunlight.
5. The speed control should start slowly from low speed to high speed.
6. The machine may experience some displacement during high-speed oscillation, so it should be monitored by someone during use.

Water bath oscillatorinstructions:

1、Add an appropriate amount of water to the water tank (the water level should be 2-3cm above the spring clamp),Put the reagent bottle on the spring clip.

2Firstly, connect the power and turn on the heating switch,The temperature controller lights up,At this point, click the SET function button on the temperature controller,At this point, click the set function button on the temperature controller. The upper row displays sp and the lower row displays the set temperature. Click the △ or ▽ button to select the desired working temperature. After setting, click the set function button again to enter the constant temperature timing setting. The upper row displays st and the lower row displays the set time,click▲perhaps▼Select the constant temperature timing time with the key (if timing is not required, set the time to0Just click the set button again to exit the setting state. At this time, the temperature inside the box is running at a constant temperature according to the set temperature; After running, the buzzer will sound an alarm and stop heating.

3Adjust the oscillation "timing knob", select the oscillation timing time (if timing is not required, adjust the timing knob to the normally open position), and then slowly adjust the "speed control knob" to the desired oscillation speed.

4After use, adjust the speed control knob to0Turn off the power, if not in use for a long time, unplug the power, drain the water, clean and wipe it clean in a timely manner to extend its service life.

Water bath oscillatormatters needing attention:

1. The power socket provided by the user should have good grounding measures.
2. It is strictly prohibited to move the machine during normal operation.
3. It is strictly prohibited for objects to collide with the machine.
4. Children are strictly prohibited from approaching the machine to prevent accidents.
5. Before replacing the fuse, ensure that the power supply has been cut off.
Note: Special specifications can be customized. From the date of production, the product comes with a one-year free warranty and lifetime maintenance.