Introduction:The whole vehicle axle coupling road simulation test iron floor, test iron floor, test iron floor, iron floor, experimental iron floor Quanyi Machinery Manufacturing Company is a professional manufacturer of iron floors. When designing iron floors for users, our company designs them based on the detailed problems of the user's working conditions to ensure the protection of the user's interests.

The whole vehicle axle coupling road simulation test iron base plate is mainly used to fix workpieces and is the basic working platform for fitters to debug, assemble, and maintain equipment. Mainly used in engine laboratories to provide a basic experimental platform for engines, dynamometers, etc. Suitable for various types of testingThe reference plane used for precision measurement in experimental work; Used as a benchmark for mechanical inspection and measurement; Check the dimensional accuracy or positional deviation of parts and make tight markings. Cast iron flooring can be used as a vibration test bench and is also an essential basic tool in mechanical manufacturing. It is usually made in box type, square, circular, rectangular and other shapes, and the structure is divided into box type, double enclosure type, and single enclosure type.

The iron base plate for vehicle axle coupling road simulation test is mainly used in the engine laboratory, providing a basic experimental platform for engines, dynamometers, etc. Suitable for various types of testingThe reference plane used for precision measurement in experimental work; Used as a benchmark for mechanical inspection and measurement; Check the dimensional accuracy or positional deviation of parts and make tight markings. Cast iron flooring can be used as a vibration test bench and is also an essential basic tool in mechanical manufacturing. It is usually made in box type, square, circular, rectangular and other shapes, and the structure is divided into box type, double enclosure type, and single enclosure type.

Iron floor alias: Cast iron floor-Experimental iron floor - cast iron flat plate - cast iron plate platform

Iron floor components accessories: The cast iron platform consists of a cast iron floor body, oil guide groove, protective sheath and cover plate, anchor bolts, etc.

Common specifications for iron base plates in vehicle axle coupling road simulation tests(mm)： 1000 x 750, 1000 x 1000, 1000 x 1500, 1000 x 2000, 1500 x 2000, 2000 x 3000, 2000 x 4000, 2500 x 4000, 3000 x 4000, 2000 x 5000, 2000 x 6000, 3000 x 6000 are generally assembled in small pieces and can be customized with irregular specifications.

Design and Performance Requirements for Iron Base Plate in Vehicle Axle Coupling Road Simulation Test:

　　1.1. Material used for laboratory cast iron flooring: HT200-250； Mechanical properties, tensile strength: not less than 250Mpa, hardness: HB180 -226；

　　1.2. Utilize the concept of high strength to ensure equal lifespan of all parts;

　　1.3. The thickness of the working panel on the laboratory cast iron floor is uniform, and the longitudinal and transverse reinforcement plates are evenly distributed to make the bottom plate structure symmetrical, that is, the strength of each part is equal and the stiffness is increased;

　　1.4. The working face thickness, surrounding thickness, and rib plate thickness of the laboratory cast iron floor shall be cast according to the drawing requirements to ensure uniform wall thickness, reduce internal stress during casting shrinkage, and prevent deformation.

　　1.5. The laboratory cast iron floor must undergo two heat treatments, one for the blank and one after rough machining, to eliminate internal stress and prevent deformation;

　　1.6. The T-shaped groove processing surface of the laboratory cast iron floor shall not have any casting defects that cannot be removed during processing. The allowable casting defects on other processing surfaces are: 1 within a diameter range of 200mm, with a size of 3mm in diameter and 2mm in depth, and a maximum of 15 (within a 4000 * 1900 plane); The allowable defect range for non machined surfaces: 1 defect is allowed within a diameter of 100, with a size of 3mm in diameter and 2mm in depth;

　　1.7. Castings should be sandblasted and non machined surfaces should be sprayed with primer G06-4 ZBG51010-87;

　　1.8. The dimensional tolerances, flatness, and parallelism of the laboratory cast iron floor working platform (upper surface) shall be determined in accordance with relevant standards.

　　1.9 The supplier shall design the anchor bolt holes according to the length requirements, and the nuts shall not protrude above the bottom plate plane after installation. The supplier shall also submit the civil engineering casting requirements for the anchor bolts, be responsible for the casting positioning of the anchor bolts, supervise the casting deviation, and retest the casting results.

　　1.10. According to the width series dimensions of the configured unit chassis, its length direction can withstand external forces during processing, movement, lifting, and installation.

　　1.11. During installation, place the corresponding machine tool adjustment shim according to the position of the anchor bolt hole, which can be adjusted by 10-15mm. The anchor bolt hole is equipped with a cover plate.