Vicometo brandVM-WWood moisture detector​Developed and produced with advanced technology introduced from the United States, this instrument has high performance and strong stability. It adopts the principle of high-frequency electromagnetic wave induction, digital display, integrated design, and has 10 gears for measuring the moisture content of different tree species. Special tree species can also be calibrated. This instrument has high measurement accuracy, wide applicability, small size, and light weight, making it an ideal choice for on-site detection and rapid measurement of moistureIt is a good helper in the production and testing process of the wood industry.Using the VM series rapid moisture analyzer, non-destructive measurement can be achieved in just a few seconds, which has been favored and praised by enterprise users.

Operation steps:

VM-WWood moisture detectorBefore measuring the wood, first turn on the switch (turn the switch to ON). At this time, press the test probe firmly onto the wood. The thickness of the measured wood should be above 50mm, and the curved surface of the probe should be in line with the floor surface. After the displayed number stabilizes, the reading at this time is the actual moisture content of the measured wood. Easy to operate, precise calculation!

Vicometo brandVM-WProfessional Wood Moisture AnalyzerHas the following characteristics:

1Adopting high-frequency principle, LCD digital display, probe and host integrated.
2existWhen detecting the moisture content of wood, trees, etc., simply place the instrument probe against the surface of the measured object to determine its moisture content. The measurement is fast and can be completed in one second.
3Stable performance, accurate measurement, and no destructive effect on the surface of the measured object.
4Small in size and light in weight, it can be carried on site for rapid testing, making it a good helper for on-site testing personnel to detect moisture content.

Widely used inThe determination of moisture content in various types of wood, wooden boards, furniture, etc. does not require perforation on the surface or inside of the wood. Simply lightly press the instrument sensing probe onto the surface of the wood, and after 1 second, the value stabilizes, which is the moisture content of the wood.

1When measuring, hold the lower half of the instrument in hand, keep the body of the instrument parallel to the object being measured, and gently press the three sensing probes of the instrument onto the object being measuredThe surface is sufficient.

2Due to the strong penetrability of high-frequency waves, the presence of metal around the measured object can lead to inaccurate measurements. Therefore, during measurement, there should be no metal or other sensing objects around the instrument probe.
3The moisture meter is a contact type measuring instrument, and the prerequisite for measurement is that the three sensing probes of the instrument must be in full contact with the measured object.
4When there is no display or the zero value cannot be adjusted within ± 00.5, and the display number jumps, the battery should be replaced at this time. The battery is located below the back of the instrument. Unscrew the screws on the battery cover, remove the old battery, and replace it with a new one. If the battery cannot be zeroed after replacement, please open the battery back cover one by one and find the tail zeroing knob,Use a flat screwdriver to adjust the potentiometer in the hole, so that the zero position of the instrument is within 00.5.
5. If the instrument is not used for a long time, the battery should be removed to prevent damage to the instrument caused by battery leakage.