XHAM-IRHD Fully Automatic Miniature International Rubber Hardness Tester

1overview

This instrument is used to measure the conventional hardness of rubber and similar rubber material test pieces and specimens. It's executionGB/T6031-MThe Hardness of Vulcanized Rubber（30-85IRHD）The determination——The standard device for micro testing.

pass throughhigh-precisionThe precise coordination between the transmission system and the sensing system automatically completes a single test under the control of the systemIn addition to measuring the hardness of standard rubber test pieces, it can also measure the apparent hardness of small volume finished parts, especially suitable forOMeasurement of apparent hardness of the ring and non-destructive determination of the apparent hardness of the small remaining parts of a damaged component.

2、 Main features:

1Using laser point finding technology is more suitable for targetingOInspection of the circle. The device will automatically findOThe highest point of the cross-section of the ring is sent below the measuring head to automatically complete the hardness test.

2Adopting a touch integrated operating system, the interface is intuitive and generous, making it easier to operate

3German imported servo system, precise positioning, ensuring accurate measurement.

4Comes with micro printing, each sample supports5Point output.

IIISpecification

1Contact force:8.3±0.5mN

2Compression force:145±0.5mN

3Diameter of the pressure needle ball:0.395±0.005mm,Foot measurementholeФ1.0±0.15mmPress it down3.35±0.15mm

4Compression force:235±30mN

5The minimum thickness of the test piece is1mm（less than1mmThe test piece can be stacked in two layers）；OMinimum cross-sectional diameter of the ring0.8mm

6Testing (pressing) time:30s

7Vertical maximum travel:30mm

8Maximum lateral travel:120mm