Main Technical Performance

1、supply voltage: AC220V± l0%50Hz； DC24V±1V.

2、Input signal:Alarm signal with eight passive contactsinput；Normally open contacts should function independently,Should not be associated with ititThe lines are connected together,connectdropThe maximum line between the alarm and the deviceelectricityThe resistance should not exceed10Ω.

3 , losego outsignal：Equipped with one public alarm contact output.

4 Confirmation method:hand movement.

5 Working conditions:

A )ambient temperature: 0～45℃.

B )relative humidity:≤ 85%.

C)There should be no corrosive gases in the surrounding air.

6 Power consumption:Power consumption when the machine does not alarm( 1W,When an alarm is triggered, one circuit consumes approximately1.5W ).

7 External dimensions : one hundred and sixty×80×175mm .

8、Instrument weight:＜1.6Kg.

structure characteristics

This instrument is designed with a drawer style structure，When extracting the movement,Just release the four rear gaugesscrewimmediately.Internal structure as shown in the diagramoneAs shown.

1、Power light:Indicate whether the power supply is available or not

2The beeWuqi:When in an alarm state, it is displayed to the user

3、Lamp screen: There are a total of eight light screens ，Each light screen displays a reportPolice circuit.lampThe screen consists of lampshade, plastic sheet, and lightseatLamp composition.You can use a small knife to lift the lampshade open，Plastic sheets are used to engrave the tag numbers of alarm circuits.
4、Test Button:The test button is used to check if the alarm is working properly,Press the test button,Eight light screens flashing simultaneously，Accompanied by an audio alarm，When multiple alarm devices are used in combination,Can be used with an external test button.

5、Eliminate button:The elimination button has two functions

A)Eliminate function:approachPress the erase button to switch the momentary alarm to memory mode(Sound mouth indicatoreliminateSound and light are always on)

B)Test lamp function:Press the eliminate button,Eight light screens should be fullbright,When multiple alarm devices are used in combination,Can be used with one externalConnect the elimination button.

6Can be connected externallyXXS-15、16Speaker or electric bell.

Installation and wiring
1、Sound the alarmdoPanel mounted instrument, instrument panel opening sizedo152^＋1×76^＋1mmAs shown in Figure (3):

2Instrument wiring methodAs shown in Figure (4)：

Figure 4

3、Alarm light screenThe order of arrangementAs shown in Figure (5):

Figure 5