YAMATO Yamato Organic Solvent Recovery Unit GAS410 in Japan-Fornitore globale

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone

18049799682
Address

1150 Lanfeng Road, Shanghai

Contact Now

YAMATO Yamato Organic Solvent Recovery Unit GAS410 in Japan

Product description: It is connected with spray dryer to form a nitrogen closed cycle with high safety

Contact Supplier

More Products

Product details

product description

It is connected with the spray dryer to form a nitrogen closed circulation mode with high safety.

When organic solvents are used in spray dryers ADL311S, GB210-A and DL410, the organic solvent used together is recycled to prevent external discharge

Collecting device.

The treatment of flammable and toxic solvents can be achieved by using a nitrogen sealed circulation method and a combination of a refrigeration unit and a condenser for solvent recovery.

It can dry easily oxidizable substances.

Due to its ability to dry at low temperatures, it can also dry substances that are prone to thermal deformation.

Under strict safety measures, spray drying is carried out to recover products and solvents.

specifications

model		GAS410
Solvent recovery method		Condenser+freezer
sexually ability	recycle gas	Nitrogen (connected to ADL311S-A, GB210-A, DL410 in a closed loop)
sexually ability	Circulating air volume	0.12～0.65m3/min
construct accomplish	Air compressor (for spray)	Linear reciprocating air compressor
	Circulation blower	Z blower
	Solvent recovery container	2Lflask
	freezer	Air cooled fully enclosed, 400W R404A
	Solvent recovery structure	Condenser cooling structure
	filter	Filter cartridge type filter
	operation panel	Condenser temperature display monitor
		Filter differential pressure gauge (filter mesh blockage monitoring)
		Oxygen concentration monitor
		Blower air volume adjustment knob
	Oxygen Sensor	Fuel cell sensor
	pump	Oxygen sensor cycling
Safety function		Oxygen concentration meter, combustible gas alarm, overcurrent leakage protection switch, N2 forced introduction (when nozzle is removed)
instrument for drawing circles check	External dimensions	W710×D950×H1450mm
	weight	About 130kg
	Rated current of power supply (50/60Hz)	AC200～240V 5A
	Necessary N2 quantity	0.2MPaWhen set, 30L/h
Accessories		Connect one set of related components, 2L flask

yamoto

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content