1、 Overview

YTLThe series of submersible desulfurization pumps is a vertical desulfurization submersible pump developed by our company based on the characteristics of industrial flue gas desulfurization and the advanced technology of similar products at home and abroad; Mainly used for conveying various slurries with a solid content not exceeding 35%.

1.1 Model Meaning
For example, YTL50-160

Y - Code for vertical submersible pump

TL - Code for desulfurization dedicated pump

50- Pump suction inlet diameter 50mm

160- nominal diameter of impeller 160mm

1.2 Performance range
Flow rate: 1.6m³/h-400m³/h
Lift: 5m-80m
Design pressure: 1.6MPa
Temperature of conveying medium:- 20℃~100℃

2、 Pump structure description
The YTL series submersible desulfurization pump is a cantilever centrifugal pump when the submersible length of the pump is less than 1.5 meters. The submersible part has no bearings, seals, or vulnerable parts, and is maintenance free; This structural pump is mainly composed of pump body, impeller, pump cover, support pipe, pump frame, shaft and other components.
The YTL series submersible desulfurization pump is a vertical long shaft submersible centrifugal pump when the submersible length of the pump is greater than 1.5 meters. The submersible part is equipped with wear-resistant and corrosion-resistant sliding bearings; This structural pump consists of a pump body, impeller, pump cover, lower wear-resistant sliding bearing, middle wear-resistant sliding bearing, support tube, pump frame, shaft and other components (requiring an external flushing device).

3、 Performance parameter table