YTUBSS-2L economical turbidity suspended solids analyzer-Fornitore globale

Room 303, Linzhan Wealth Building, No.1 Shenhua Street, Liuyue, Henggang Street, Longgang District, Shenzhen

YTUBSS-2L economical turbidity suspended solids analyzer

Equipment Introduction

YTUBSS-2L economical turbidity suspended solids analyzer

Instrument Overview
This instrument is widely applicable to clean water samples such as surface water and ground water. If it is necessary to measure wastewater with high pollution levels, corresponding treatment and measurement are required. Not suitable for the determination of low turbidity water, the minimum turbidity recognition degree of the instrument is 3 degrees (NTU).

The measurement of suspended solids in this instrument is improved and developed based on the national standard weight method, and the turbidity is determined according to GB13200-91 "Determination of Turbidity in Water Quality". It uses an imported high brightness long-life cold light source and a colorimetric dish for comparison. The operation is simple and time-saving, and it is equipped with a large screen LCD Chinese display for direct data reading; The instrument comes with a standard curve and can also calibrate the curve as needed; Comes with measurement value storage function and printing (date, time, parameters, test data); The instrument has data power-off protection and data storage functions to prevent data loss due to errors.

TECHNICAL INDEX
Measurement method: Suspended solids: National standard weight method Improved turbidity: GB13200-91 "Determination of Turbidity in Water Quality"
Measurement range: Suspended solids: 5-500 mg/L Turbidity: 0.5-1000NTU (segmented)
Detection limit: Suspended solids: 5 mg/L Turbidity: 0.5NTU
Dissolving temperature: No need for digestion
Colorimetric method: Colorimetric dish colorimetric
Resolution: 0.001 mg/L
Accuracy: The indication error shall not exceed 5%
Repeatability: Relative standard deviation not exceeding 3%
Optical stability: less than 0.001A/20 minutes
Power supply: AC (220V ± 5%), 50Hz
Environmental temperature: 5-40 ℃
Environmental humidity: ≤ 85% without condensation

Weight: Host<1.3kg

Instrument characteristics
1. LCD screen interface design, fully Chinese operation, direct data reading, simple operation.
2. Imported cold light source, no preheating required, energy-saving, environmentally friendly, fast response, with a lifespan of up to 100000 hours and strong optical stability.
3. Built in standard curve, no need for user calibration and calibration.
4. Enable guided measurement with one click operation, simple and fast
5. Adopting a digestion colorimetric integrated method, reducing manual operation, making the measurement simple, fast, and safe.
6. Customize more than 40 curves and store 200 complete detection data.
7. It has power-off protection function to prevent data loss.
8. One click factory reset to prevent loss or accidental deletion of standard curves.

9. The equipment is not damaged by human factors, with a three-year warranty and lifetime free software upgrades.

Configuration List
One measuring instrument host, two colorimetric dishes, one power cord, one instruction manual, one colorimetric tube cleaning cloth, one test tube rack, and one certificate of conformity/warranty card.