UV aging test chamber+Beijing

Product Introduction：The UV aging chamber uses fluorescent UV lamps as the light source, and simulates the UV radiation and condensation in natural sunlight to conduct accelerated weather resistance tests on the materials, in order to obtain the results of material weather resistance.

Product Usage:This machine is used to test the degree of product and material aging in non-metallic materials and organic materials (such as coatings, paints, rubber, plastics and their products) under changes in climate conditions such as sunlight, humidity, temperature, condensation, etc., and to obtain discoloration, fading and other conditions in a short period of time.

Reference standard:
GB/T16422.1-2006 Plastics Laboratory Light Source Exposure Test Method Part 3: Fluorescent UV Lamp
GB/T16422.3-1997 Plastic laboratory light source exposure test method Part 3: Fluorescent ultraviolet lamp
GB/T14522-2008 Test Method for Artificial Climate Aging of Plastics, Coatings, and Rubber Materials for Mechanical Industry Products - Fluorescent Ultraviolet Lamp
GB/T16585-1996 Test Method for Artificial Climate Aging of Vulcanized Rubber (Fluorescent UV Lamp)

1、 Product specifications and parameters

2、 Box material
1. Shell material: treated with A3 steel plate spray coating;
2. Inner liner material: imported SUS stainless steel plate;
3. Box cover material: A3 steel plate spray treated;
4. Install a total of 8 UV series ultraviolet lamps on both sides of the studio;
5. The heating method is the inner pot sink type heating, which heats up quickly and has a uniform temperature distribution;
6. The box cover is a double-sided flip cover, which can be opened and closed easily and freely;
7. Automatic replenishment of inner tank water level;
8. The sample holder is composed of a cushion and a tension spring, both made of aluminum alloy material;
9. The bottom of the test chamber adopts high-quality fixed PU movable wheels;
10. The drainage system uses vortex and U-shaped sedimentation devices for drainage;
11. The distance between the surface of the sample and the plane of the ultraviolet lamp is 50 millimeters and parallel;
12. Equipped with automatic alarm for lamp replacement;

3、 Heating system:
1. Adopting U-shaped titanium alloy high-speed heating electric heating tube
2. The temperature control output power is calculated by a microcomputer to achieve high-precision and high-efficiency electricity efficiency
3. Anti overheating function with heating system

4、 Blackboard temperature control:
1. Using black aluminum plate to connect temperature sensor
2. Using a blackboard temperature meter to control heating, the temperature is more stable

ZN-P UV aging test chamber+Beijing

5、 Circuit control system:
1. Adopting a 7.0-inch touch screen temperature controller, the control accuracy is high; 0.1℃
2. Equipped with power-off memory function, it can continue the remaining test process when restored to power
3. Temperature control adopts P I.D ＋S.S.R， Coordinated control of the system on the same channel can improve the stability and lifespan of control components and interface usage
4. Touch sensitive settings, digital and direct display
5. Having P I. The automatic calculation function of D can reduce the inconvenience caused by manual setting
6. Lighting, condensation, and spraying can be independently controlled or alternately controlled in a cyclic manner
7. The independent control time for lighting and condensation, as well as the alternating cycle control time, can be set arbitrarily within one thousand hours
8. In operation or setting, if an error occurs, a warning signal will be provided.
9. Non Lipu rectifier and starter (ensuring that the UV light can be turned on every time the machine is turned on)

6、 Light source:
1. The light source uses 8 UV series fluorescent tubes with a rated power of 40W as the light source, distributed on both sides of the machine, with 4 tubes on each side;
2. There are UVB-313, UV-A340, UV-C365 light sources available for users to choose from and configure; (Choose one)
3. The luminescence spectrum energy of UV-B313 lamps is mainly concentrated around the wavelength of 313m;
4. The luminescence spectrum energy of UV-A340 lamps is mainly concentrated around the wavelength of 340nm;
5. The luminescence spectrum energy of UV-C365 lamps is mainly concentrated around the 365nm wavelength;
6. Due to the gradual decay of the energy output of fluorescent lamps over time, in order to reduce the impact of light energy decay on the experiment, this test box replaces an old lamp with a new lamp every quarter of the lifespan of the fluorescent lamp among all 8 lamps. In this way, the ultraviolet light source is always composed of new and old lamps, resulting in a constant output of light energy;

7、 Spray control:
1. Spray uniformity adjustment: Using the manual control function of the controller, observe the spray condition while the door is open, and adjust or replace the nozzle accordingly.
2. Spray status monitoring: The machine is equipped with a spray device that simulates temperature fluctuations and rainwater erosion during rain. There are several nozzles in total that spray evenly. The timing and duration of spraying are freely set by the customer.
3. Users need to prepare deionized water with pressure.
4. Drainage: There needs to be a drainage ditch on the floor near the host.
5. Work area: 234 × 353cm (including personnel workspace)

8、 Safety protection device:
1. Protective door lock: If the lamp is on and the door of the box is opened, the machine will automatically cut off the power supply to the lamp and enter a balanced cooling state to prevent harm to the human body. The safety door lock meets the safety protection requirements of IEC 047-5-1.
2. Over temperature protection inside the box: When the temperature inside the box exceeds 93 ℃; At 10%, the machine will automatically cut off the power supply to the lamp and heater, and enter a balanced cooling state.
3. Low water level alarm in the sink to prevent the heater from burning out.

(Above are leakage, short circuit, overheating, water shortage, overcurrent protection/controller power-off memory)

9、 Equipment usage conditions:
1. Environmental temperature: 5 ℃ to+28 ℃ (average temperature within 24 hours ≤ 28 ℃);
2. Environmental humidity: ≤ 85%;
3. The machine should be placed 80 centimeters in front, back, left, and right, and no objects should be placed;
4. Power requirement: AC220 (± 10%) V/50HZ

Free home delivery, after the installation and debugging of the equipment is completed, relevant technical personnel will receive free basic operation training at the user's site, with no limit on the number of people