ZQS6-2000A Decorative Brick Adhesive Strength TesterIt is provided by Shanghai Meiyu Instrument Equipment Co., Ltd. If you would like to further understand in detailZQS6-2000A Decorative Brick Adhesive Strength TesterFor the price, specifications, process, performance, and operation, please contact Shanghai Meiyu Instrument Equipment Co., Ltd. Every product sold by our company is covered by a three guarantee service. The maintenance costs incurred during the warranty period, including component costs, labor costs, travel expenses, and transportation costs, are all borne by our company, except for those explicitly stated as not covered by the warranty. Products are inspected or tested before leaving the factory, and the possibility of quality problems is very small.

Related productsAdhesive strength tester for decorative tiles

Introduction:
This product is designed in accordance with the national building materials industry standard "Code for Construction and Acceptance of Exterior Wall Decorative Brick Engineering". It is easy to operate and can be continuously and uniformly loaded. The manual pump is connected with a dedicated jack, and the structure is compact and durable. It uses LCD display to record the bonding force value accurately and automatically maintain the peak value. The product is powered by a dry battery, compact and lightweight, with a total weight of about 3 kilograms, making it easy to carry and use on site.

It fully complies with the requirements of the JGJ110-97 standard for inspection of bonding strength of decorative tiles in construction projects. The specifications of the standard blocks used are 95mm × 45mm and 40mm × 40mm. When meeting the qualification requirements, the minimum tensile force is 0.64kN and the maximum tensile force is 2.56kN. In response to the low bonding strength and small bonding force of decorative tiles, the maximum tensile force is specially designed to be 6.00kN to ensure the detection accuracy of the instrument. Each instrument is equipped with a test certificate from a national legal measurement unit. The ZQS6-2000 veneer brick bonding strength tester is an ideal replacement for the original bulky, structurally complex, and inconvenient to operate testers. This tester has been widely used in many construction units, engineering quality inspection stations (centers), laboratories, research institutes, and supervision units across the country, and is highly welcomed by engineering and technical personnel.

Parameters:
△ maximum pulling force: 2KN.
Basic error: ≤ 0.1 (% FS) ± 1 word.
△ Resolution: 0.05 (% FS).
△ Display: 3 1/2 digit LCD display.
△ Zero drift: ≤ 0.1 (%/4h) ± 2).
△ Peak holding: Positive peak holding (holding time 30 seconds).
△ Operating temperature: 0~45 degrees.
△ Power supply: 2 No. 5 dry batteries.

As mentioned above, we believe that this instrument is ideal, with stable data, less pollution and waste, low price, and easy operation.